MP-150 Concrete Primer
1 of 389 products in this brandMP-150 Concrete Primer is a rubber-based, air-dry solvent primer made from synthetic polymers and resin. It conditions surfaces to enhance adhesion between butyl tape sealants and concrete, with a consistency that allows dripless brush application. Ideal for fresh, damp, dusty, or rough concrete surfaces.
RTU Product Type: Primer
Compatible Substrates & Surfaces: Concrete
Features: Improved Adhesion
Application Method: Brush
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Application Information
- Cure Method
Applications
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Product Applications
-
- Stir MP-150 thoroughly before applying to ensure uniformity.
- Apply a medium brush coat of MP-150 to the clean surface and allow primer to vent or air dry for 10-30 minutes.
- Apply butyl tape to the primed surface within 8 hours to prevent airborne dust particles from contaminating the primed surface and reducing the bond strength.
Features
- Ready-to-Use Product Features
Packaging & Availability
- Regional Availability
Physical Properties
- Color (Properties)
Properties
- Density:
-
800.0 kg/m³
- Shelf Life:
-
12.0 months
- Solid Content:
-
25.0 %
- Specific Gravity:
-
0.8
- Physical Properties
-
Value Units Test Method / Conditions Coverage (coverage is dependent on porosity of concrete and thickness of film applieday) 100 - 200 ft²/gal - Density 6.65 lbs/gal - Dry Time (depending on temperature) 10 - 30 minutes - Flash Point (flammable) 25 °F - Solids Content 25 % - Specific Gravity 0.8 - -
Safety & Health
- Safety Precautions
-
Keep away from heat, sparks or open flame. Use only with adequate ventilation. Avoid breathing vapors.
Storage & Handling
- Storage and Shelf Life Condition
-
MP-150 Concrete Primer has a shelf life of 12 months in the original unopened container. After opening, keep container sealed when not in use. Application equipment may be cleaned with mineral spirits.
- Shelf Life
-
12 months