Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Product Attributes
Features Benefits Contains no CFC or HCFC, high global warming potential propellants Using no high GWP propellants ensure PG-1 EF ECO meets all national and state regulations.
Proprietary spray nozzle allows for multiple applications Millennium PG-1 EF ECO can be used for spatter or ribbon application depending on the need, increasing productivity and limiting products needed on the job.
VOC content <50 g/L Ultra low VOC content formula is approved for use in all OTC and SCAQMD regulated regions.
No extra equipment required Applicator, hose, and all accessories needed are included with each canister set, ensuring there is no extra equipment or additional steps needed.
Faster and easier application than using mechanical fasteners Millennium PG-1 EF ECO eliminates potential for roof deck corrosion and disruption of building occupants due to fastening.
Solvent free formula Millennium PG-1 EF ECO contains no solvents, making it suitable for use with EPS and XPS insulation in addition to Polyiso.
Eliminates Thermal Bridging Using Millennium PG-1 EF ECO in lieu of mechanical fasteners eliminates thermal bridging and ensures maximum R-Value.
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Basic Use
Millennium PG-1 EF ECO is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation board stock, and smooth or gravel built-up asphaltic roof surfaces. Millennium PG-1 EF ECO is also designed for fleeceback membrane attachment in ribbon or spatter applications. It is dispensed in 1” – 1.5” (2.5cm – 3.8cm) wide beads or in a spatter application using our proprietary dual-use (Purpose?) static mixer. Our unique design allows both ribbon and spatter applications from a single static mixer. Millennium PG-1 EF ECO expands and rises to fill minor surface irregularities.
- Product Limitations
- Do not apply to wet surface.
- Not recommended for use with insulation boards larger than 4’x4’ (1.2m x 1.2m).
- Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface.
- Do not apply when temperatures are below 40°F (4°C).
- Surface Preparation
All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven. For re-cover applications over gravel surfaced BUR apply Millennium Universal Primer prior to the application of Millennium PG-1 EF ECO. For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, Millennium Surface Treatment may be required prior to the application of Millennium PG-1 EF ECO.
Properties
- Typical Properties
Value Units Test Method / Conditions Skin Time* 5 - 8 minutes - VOC Content max. 50 g/l - Coverage Rate (Ribbon application, per set)** approx. 35 ft² - Coverage Rate (Spatter application, per set)** approx. 24 ft² - - Note
* - Note conditions - i.e. Standard Temperature/Humidity Conditions (~70F / 50% RH)
** - Coverage rate estimates indicate total square feet of insulation attachment per kit. Rates are based on an application pattern of 4 (four) 1” – 1.5” (2.5cm – 3.8cm) ribbons spaced 12” (30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation board. Coverage rates may be lower when used over irregular surfaces.
Packaging & Availability
- Packaging Information
Millennium PG-1 EF ECO is available in the following packages:
Package Size Part # Canisters/Pallet Part 1 49# Canister PG-SPECO-A01 36 Part 2 43# Canister PG-SPECO-B01 36 Part A and Part B canister and packaged in individual labeled boxes. The Part A box will contain one applicator, two hoses (1 for part A and 1 for part B), five static mixers, five ribbon application tips (installed on static mixers), five spatter application tips, a wrench, petroleum jelly and a set of gloves.
Storage & Handling
- Shelf Life
- 12 months
- Storage Conditions
- Keep temperature of contents between 60°F to 90°F (16°C to 32°C). Bring temperature of material to approximately 70°F (21°C) for approximately 24 hours before use. Do not store in direct sunlight or above 95°F (35°C). Store canisters valve side up.
- Keep from freezing.
- Millennium PG-1 EF ECO has a shelf life of 12 months when stored properly.