Millennium One Step Foamable Adhesive®

1 of 41 products in this brand
Millennium One Step Foamable Adhesive® is a highly elastomeric, all-purpose, foamable adhesive that contains no solvents, sets in minutes, and is designed for use with our One Step™ application process. Millennium One Step™ application is quick and easy, resulting in significant labor savings for the contractor. No expensive, unreliable pump carts or spray rigs are required.

Chemical Family: Urethanes

Product Type: 2K (2 component) Adhesive, Elastomeric Adhesive, Foamable Adhesive, Reactive Adhesive, Structural Adhesive

Application Area: Cover Boards, Roofing Substrates, Roofs

Application Method: Nozzle

Compatible Substrates & Surfaces: Asphalt, Concrete, Gypsum, Metal, Perlite, Steel, Textiles, Wood, Wool

Features: Excellent Flexibility, Low Foaming, Solventless

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Labeling Claims
Ready-to-Use Product Features
Key Attributes
Features Benefits
Replaces fastener plates

Reduces thermal bridging maintaining the insulation integrity

No temperature restrictions

Suitable for all climates

Solvent free

Essentially VOC free, no odors

Elastomeric

Remains flexible, absorbs stresses

Low rise foam

Accommodates minor surface irregularities

Replaces fasteners

Minimizes penetrations and deck corrosion

Applications & Uses

Markets
Applications
Application Area
Application Method
Compatible Substrates & Surfaces
Basic Use

Millennium One Step Foamable Adhesive® is designed for use as an adhesive for bonding approved roof insulations to a building’s structural roof deck, base sheets, other insulation boards, and smooth or properly prepared graveled built-up roof surfaces.

Millennium One Step Foamable Adhesive® eliminates the need for mechanical fasteners that can often cause damage to the roof deck, which can reduce the roof’s service life.

Approved Insulations and Substrates
  • HD wood fiber
  • Polyisocyanurate
  • Perlite (upon approval)
  • Polystirene
  • Gypsum cover board
  • Asphaltic cover boards
  • Concrete
  • Gypsum roof deck
  • Cementitious wood fiber
  • Wood or steel
  • Mineral wool
  • Lightweight insulating concrete
  • Modified bitumen membranes
  • and base sheets (sanded or granule surfaced)
  • Approved insulations (multi-layer applications)
  • Smooth or gravel surface built-up roof (re-roof applications)
Limitations
  • Do not apply to wet or damp surfaces.
  • Not recommended for use with insulation boards larger than 4’ x 4’ (1.2m x 1.2m).
  • Do not use warped or curled insulation boards. All insulation boards must lay flat upon the roof surface.
  • When applying Millennium One Step Foamable Adhesive® over a smooth or sanded APP roof surface Millennium Surface Treatment may be required.
Equipment

The fast and dependable One Step™ applicators make applying Millennium One Step Foamable Adhesive® simple:

  • Patented Multi-Bead Plus Applicator*
  • Patented Multi-Bead Applicator**
  • Battery Powered Single Bead Applicator
  • Pneumatic Single Bead Applicator
  • Ultra Drive Manual Applicator
  • Heavy Duty Manual Applicator
Surface Preparation

All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, loose and/or embedded gravel, un-adhered coatings, deteriorated membrane and other contaminants that may result in a surface that is not sound or is uneven.

For applications over gravel surfaces apply Millennium Universal Primer prior to the application of Millennium One Step Foamable Adhesive®. For applications over fresh and/or non-oxidized asphalt, coal tar or plastic film membranes, Millennium Surface Treatment maybe required prior to the application of Millennium One Step Foamable Adhesive®.

Application Method

1. Remove snap off tip from the One Step™ mixing head and keep for re-use.

2. Attach a One Step™ mixing nozzle to the threaded mixing head.

3. Place the cartridge into the appropriate One Step™ applicator. Caution: Adhesive should be dispensed immediately after loading the cartridge into the dispensing tool to prevent adhesive from foaming and curing in the mixing tip.

4. Apply Millennium One Step Foamable Adhesive® directly to the substrate, using a ribbon pattern. Space 1/4” to 1/2” (0.6cm to 1.3cm) wide beads, 12” (30cm) o.c., to achieve proper coverage rates for insulation attachment. As adhesive is applied, immediately place insulation board into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the insulation board and substrate.

5. Un-used material can be applied at a later date simply removing the used static mixing tip, wiping the neck of the cartridge clean and plugging the cartridges with provided snap off tips.

6. Caution: Millennium One Step Foamable Adhesive® reacts quickly in warm, moist climates. Roofers must set insulation boards quickly in these conditions.

Note

*US 9,381,536 B2
**US 7,056,556 B2; US D501,855 S; CA 2,493,739 C

Properties

Color (Properties)

Packaging & Availability

Packaging Type
Regional Availability
  • Africa
  • Australia & New Zealand (ANZ)
  • Europe (Excluding Russia)
  • India
  • Latin America
  • Middle East
  • North America
  • South East Asia
Packaging and Coverage

Millennium One Step Foamable Adhesive® is available in the following package:

Cartridge Size Case Part # Cartridges/Case
1.5 Liter OS-FA15-04 4

 

Covers 600 sq ft (56m2) per case. Coverage estimates indicate total square feet of insulation attachment per case. Rates are based on an application pattern of 4 ribbons, 1/4” to 1/2” (0.6cm to 1.3cm) wide, 12”(30cm) o.c. per 4’ x 4’ (1.2m x 1.2m) insulation board. Coverage rates my be lower when used over irregular surfaces and will vary depending on roughness.

Storage & Handling

Shelf Life
18 Months
Storage Conditions

Keep temperature of contents between 65°F to 85°F (18°C to 29°C) 24 hours prior to use. Do not store in direct sunlight or temperatures higher than 90°F (32°C). Shelf life is 18 months in unopened original packaging when stored at 65°F to 85°F (18°C to 29°C).