Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Zero Flame spread and Smoke developed
- Excellent Bonding and Peel Off Strength
- Solvent Free Synthetic Elastomer Emulsion
- High Compatibility with Insulation Fiber & Fabric
- Moisture Resistant
- Excellent Coverage
- Weather Resistant
- Heat Resistant
- Non-Toxic
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Product Applications
- MAGIK 85-60 is recommended for bonding of fire rated duct fabric, low Density duct liner, duct wrap, & fibrous glass insulation to painted or unpainted steel, galvanized or aluminum surface.
- MAGIK 85-60 can also be applied as a contact bond adhesive, being applied to both surfaces in areas where water entrapment may be a problem such as polystyrene to metal.
- MAGIK 85-60 is ideal for bonding fibrous glass insulation to concrete, block and other masonry surface in building construction.
- MAGIK 85-60 can also be used for ASJ, FSK, PVDC and PVC Jackets.
- Application Procedure
The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
For wet bond application apply MAGIK 85-60 uniformly on the metal surface at 8-14 m2 /liter. While wet, apply pressure to assure intimate bond. For contact bond application apply MAGIK 85-60 uniformly on the metal surface at 8-12 m2 /liter. Coat the insulation surface at 3-5 m2 /liter.
Allow the adhesive to tack fully and allow the moisture to evaporate for 20-45 minutes, depending on the local environment. Position the two mating surface together and apply pressure to assure intimate bond.
Properties
- Flame Rating
- Physical Form
- Appearance
- Cream Thixotropic Paste
- Specifications
Value Units Test Method / Conditions Specific Gravity 1.10 - 1.30 kg/ltr ASTM D 1475-98 Solid Content 62 - 68 % ASTM D 1644 Viscosity 10000 - 20000 cPs ASTM D 2196 VOC max. 1 g/ltr ASTM D 2369-98 Drying Time (Set to Touch) 10 - 15 min. ASTM D 1640 Drying Time (Dry Through) 15 - 120 min. ASTM D 1640 Service Temperature - 25 - 100 °C - Coverage Range (subject to surface condition) 3.75 - 6.25 m2/ltr -
Regulatory & Compliance
- Quality Standards
Packaging & Availability
- Regional Availability
- Packaging Information
20 Kg Plastic Pail
Storage & Handling
- Shelf Life
- 12 months
- Storage Conditions
- 12 months from date of manufacturing in original unopened containers.
- Store product (10°C - 35°C) for maximum storage life.
- Higher temperatures reduce normal storage life.
- Lower temperatures may cause increased viscosity of a temporary nature.
- Rotate stock on a “first in-first out” basis.
- Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.