Ködisil 110T is a non-sagging, translucent, one-component, neutral-cure silicone adhesive and sealant. It offers excellent adhesion to a wide range of substrates, including aluminum. This product is characterized by its high heat resistance, superior UV resistance, and superior weather resistance.

Chemical Family: Silicones

Product Type: 1K (1 component) Adhesive, 1K (1 component) Sealant, Reactive Adhesive, Reactive Sealant

Application Area: HVAC Applications, Recreational Vehicles, Windows

Compatible Substrates & Surfaces: Aluminum Alloys, Ceramic, Concrete, Glass, Metal, Plastics, Steel, Stone, Wood

Features: Excellent UV Stability, Exceptional UV Resistance, Good Sagging Resistance, Good Weather Fastness, High Elasticity

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Applications & Uses

Markets
Applications
Application Area
Compatible Substrates & Surfaces
Cure Method
Application Information
Applications Fields of Application

Construction industrial assembly

Special Applications

Especially suitable for RV (recreational vehicle) assembly

Processing Suitable Substrates

Various aluminum alloys

Various steel alloys

Many thermoplastics (except PMMA)

Thermosetting plastics

Glass
Concrete
Stone

Various ceramics

Wood

Various other substrates

Consistency Pasty
Surface Requirements Dry
Clean
Free of grease
Free of dust
Adhesion Promoter (absorbing surface)

Körabond HG 92

Adhesion Promoter (non absorbing surface)

Körabond HG 78

Cleaning Cleaner for Tools

Körasolv Silicone

Preparation

For some substrates the use of mechanical pretreatment and/or cleaner or primer is necessary to achieve good adhesion. Refer to the product properties section of this data sheet for special surface requirements and suitable adhesion promoters. Due to the huge variety of available substrates preliminary testing regarding adhesion and compatibility is strongly recommended.

Processing

Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates.

Cleaning Instructions

Clean tools immediately after use. Once cured, the material can only be removed mechanically. Appropriate cleaners are listed in the product properties.

Properties

Color (Properties)
Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Density1.01g/cm³DIN EN 542
Cured Properties
ValueUnitsTest Method / Conditions
Skin Formation Time8.0minKö-test method 100109
Hardness (after 28d, thickness of specimen = 6 mm)20.0-DIN ISO 7619-1, Shore A
Tensile Strength1.1MPaDIN EN ISO 527
Maximum Movement Capability25.0%-
Processing Parameters
ValueUnitsTest Method / Conditions
Processing Temperature10 - 30°C-
Required Squeezing Pressure2.0bar-
Recommended Operating Conditions
ValueUnitsTest Method / Conditions
Service Temperature- 40 - 180°C-

Packaging & Availability

Regional Availability
  • North America

Storage & Handling

Storage Conditions

Ködisil 110T should be used within the shelf life specified on the packaging. The storage stability only applies to material stored in original unopened containers, at storage temperature -15°C to 25°C.