Intrafolâ„¢ ES 2009
1 of 13 products in this brandRTU Product Type: Primer, Solventborne Primer
Application Area: Edge Banding, Furniture
Compatible Substrates & Surfaces: Acrylonitrile Butadiene Styrene (ABS), Polyvinyl Chloride (PVC)
Features: Fluorescent, Good Adhesion
Application Method: Roll Coater
Chemical Family: Polyvinyl Chlorides (PVC)
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Application Information
- Cure Method
Applications
- Application Area
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
Applications & Uses
- Applications
-
Primer for furniture edge bands
- Preparation Information
-
- The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.
- Intrafolâ„¢ ES 2009 must be stirred well before use
- Preparation and Processing Information
-
Preparation
The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.
Processing
Apply a thin and homogenous coat of IntrafolTM ES 2009 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests. - Processing Information
-
- Apply a thin and homogenous coat of Intrafolâ„¢ ES 2009 on the plastic surface and dry the applied film.
- For new materials or applications, the suitability must be confirmed by preliminary tests.
- Suitable Substrates - Acrylonitrile butadiene styrene (ABS) and Polyvinyl chloride (PVC)
- Suitable Adhesives - Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
- Allow the coated substrate to cool to room temperature before winding it up.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Benefits
-
- Good adhesion to ABS
- Solvent composition appropriate for ABS
- Free of THF
- Free of NEP
- Fluorescent (for process control)
- Product Benefits
-
- Good adhesion to ABS
- Solvent composition appropriate for ABS
- Free of THF
- Free of NEP
- Fluorescent (for process control)
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
Storage & Handling
- Storage Information
-
- Intrafolâ„¢ ES 2009 should be used within the shelf life specified on the packaging.
- The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).
- Storage Information
-
Intrafolâ„¢ ES 2009 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).