Icema™ R 145/4

Identification

Chemical Family

Polyurethanes (PU)

GBU

BAS

RTU Product Type

1K (1 component) Adhesive

Categories

Markets → Automotive & Transportation → Applications → Transportation → Marine

Markets → Automotive & Transportation → Applications → Transportation → Off Road & Recreational Vehicle (RV)

Markets → Building & Construction → Applications → Building Materials → Construction Adhesives

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → 1K Liquid Reactive Adhesives

Application Information

Cure Method

Moisture Cure

Applications

Application Area

Caravans,

Panels,

Industrial Composites

Application Method

Roller,

Spray,

Trowel,

Nozzle,

Air Less Spray

Compatible Substrates & Surfaces

Wood,

Galvanized Steel,

Acrylonitrile Butadiene Styrene (ABS),

Polyvinyl Chloride (PVC),

Expanded Polystyrene (EPS),

Cement,

High-Pressure Laminate (HPL),

Mineral Wool,

Glass Fibre Reinforced Polymer (GFRP)

Applications & Uses

Application Guidelines

• Avoid Contact with Isocyanate Reactive Substances - Avoid direct contact with isocyanate reactive substances, especially alcohol such as spirit, dilutions, cleaning compounds and reaction or curing products of silane-modified polymers or silicones until the adhesive has attained full cure. This will prevent the adhesive from curing properly.
• Curing - Water spraying accelerates the curing of the adhesive. An amount of 5 % water relative to the amount of applied adhesive is suitable for most cases.

Cleaning Information

• Clean tools immediately after use.
• Once cured, the material can only be removed mechanically.
• Appropriate cleaners are listed in the product properties table.
• Cleaner for Uncured Material - Körasolv® GL, Methyl ethyl ketone (MEK), Isopropyl alcohol and acetone.

Preparation Information

• For some substrates the use of mechanical pretreatment and/or cleaner is necessary to achieve good adhesion
• Surface Requirements - Clean, free of grease and free of dust.

 

Processing Information

• Suitable Substrates - Glass fibre reinforced plastic (GFRP), High pressure laminate (HPL), Expanded polystyrene (EPS), PVC-rigid Galvanized steel, Painted metal Acrylonitrile butadiene styrene (ABS), Mineral wool Wood and cemented material.
• Application Method - Nozzle, Spraying (exhaust required), Airless air-combi (exhaust required), Spinning application, Roller and With notched trowel
• Product is free of Solvents.
•  Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates.

Product Application

• Production of panels in the caravan industry
• Core composite elements
• Maritime industrie
• Construction supply industry 

Features

Ready-to-Use Product Features

Good Adhesion,

Excellent Multi-Substrate Adhesion,

Transparent

Features & Benefits

Labeling Claims

Solvent-free

Product Benefits

Very good adhesion to a variety of substrates

Packaging & Availability

Regional Availability

• Europe (Excluding Russia)

Physical Properties

Physical Form

Liquid

Appearance

Transparent, light yellow liquid

Storage & Handling

Storage Information

• Icema™ R 145/4 should be used within the shelf life specified on the packaging.
• The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).