HS Butyl Fleeceband 0318

1 of 18 products in this brand
HS Butyl Fleeceband 0318 is a butyl tape laminated with a non-woven polyester or polypropylene fleece. It is designed for sealing drains and filling cracks, offering flexibility and conformability for easy application. This ready-to-use tape provides an effective sealing solution for various construction and repair needs.

Product Type: Tape

Application Area: Crack Filling, Drains

Features: Conformable, Ease Of Use, Excellent Multi-Substrate Adhesion, Flexible

Technical Data Sheet
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Product Features
  • Good adhesion to a wide range of substrates.
  • Remains flexible throughout its service life.
  • The product is highly conformable.
  • Easy and accurate to use with little waste and no mess.
  • The fleece will accept paint, plaster, cement, and adhesives.

Applications & Uses

Markets
Applications
Application Area
Application Instructions

Surface preparation

  • All surfaces should be clean, dry, and free from frost, grease, and loose materials.

  • When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the butyl tape.

  • When applying the tape to porous or friable surfaces, it is recommended to treat the surface with a suitable primer, such as an exterior grade PVA, to seal and stabilise the surface.

Application

  • Remove the release paper and apply the tape to the substrates to be joined.

  • Take care to avoid rucks in the tape.

  • Roll the tape with a small roller to ensure good adhesion along the whole length of the tape.

Product Application
  • For sealing floor-to-wall joints and around drains in wet rooms.
  • For sealing cracks prior to plastering.
  • For sound-deadening applications.
  • For applications to prevent air leakage.

Properties

Performance Properties
ValueUnitsTest Method / Conditions
Dynamic Shear Adhesion12N/cm²H15
90° Peel Adhesion8N/cmH48
180° Peel Adhesion9N/cmH41
Moisture Vapour Transmission Rate0.18g/m²/24hr/mmISO 9932 / BS ISO 15106
Service Temperature Range-40 to +90°C-
Application Properties
ValueUnitsTest Method / Conditions
Application Temperature Range5 - 40°C-
Product Tolerance
  • Thickness: ±10%

Width:

  • Up to 100mm: ±2mm
  • Over 100mm: ±3mm

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Packaging Information

HS Butyl Fleeceband 0318 is normally supplied as a preformed strip on a siliconised release paper. A wide range of dimensions can be supplied. Product dimensions will determine the number of rolls per carton.

Storage & Handling

Shelf Life
24 months
Storage Condition

24 months when stored flat in original packaging in cool, dry conditions.