HS Butyl Covertape

• Good adhesion to a wide range of substrates.
• Easy and accurate to use with little waste and no mess.
• The softer composition makes this product highly conformable.
• Remains flexible throughout its service life.
• High tack.
• Conforms to IVD Instruction Sheet No. 5.

For taping over joins in membranes used in building and construction, for example damp proof membranes and vapour control layers, as an additional seal to Membrane Tape or High Performance Membrane Tape.

Surface preparation

• All surfaces should be clean, dry, and free from frost, grease, and loose materials.

• When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the butyl tape.

Application

• Remove the backing paper and press the exposed butyl onto the substrate.

• Press firmly into place.

• Use a roller with firm pressure to roll the joint and ensure a good bond.

• 1mm x 60mm x 10m – 12 rolls per box
• Other sizes available on request.

24 months when stored flat in original packaging in cool, dry conditions.