Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Instructions
Surface preparation
-
All surfaces should be clean, dry, and free from frost, grease, and loose materials.
-
When cleaning contaminated substrates, HS Butyl recommends using propan-2-ol (IPA) and allowing it to dry before applying the butyl tape.
Application
-
Apply directly from the reel onto one surface and press along its entire length to ensure good initial adhesion.
-
Remove the backing paper, position the other surface onto the sealant, and push firmly to seal across the joint.
-
Properties
- Performance Properties
Value Units Test Method / Conditions Dynamic Tensile Adhesion 32 N/cm² H5 Dynamic Shear Adhesion 12 N/cm² H15 90° Peel Adhesion 8 N/cm H48 180° Peel Adhesion 9 N/cm H41 Moisture Vapour Transmission Rate 0.14 g/m²/24hr/mm ISO 9932 / BS ISO 15106 Service Temperature Range -40 to +90 °C - - Application Properties
Value Units Test Method / Conditions Application Temperature Range 5 - 40 °C - - Product Tolerance
Rectangular sections:
- Thickness: ±10%
Width:
- Up to 25mm: ±1mm
- 26mm to 100mm: ±2mm
- Over 100mm: ±3mm
Bead sections:
- Thickness: ±10%
- Width: ±10%
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
- Packaging Information
HS Butyl 0305 is normally supplied as an extruded strip on a siliconised release paper. A wide range of dimensions can be supplied. Product dimensions will determine the number of rolls per carton.
Storage & Handling
- Shelf Life
- 24 months
- Storage Condition
24 months when stored flat in original packaging in cool, dry conditions.