Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Typical Features & Benefits
- Flame retardancy meets requirements of UL94 Flammability of Plastic Materials Vertical
- Burn Test Rating V-0
Applications & Uses
- Markets
- Applications
- Application Area
- Cure Profile
Full room temperature cure is achieved within 2-4 days and may be expeditated with an oven cure.
- Mixing Information
- Use suitable 2-part metering and mixing equipment. The A-component settles over time and requires mixing before use.
- Blend ratio is 4:1
Properties
- Flame Rating
- Physical Form
- Component A
Value Units Test Method / Conditions Viscosity ( at 25°C) 2500 cPs Brookfield RV Density 11.2 lb-mass/gal ASTM 0792 - Physical Properties
Value Units Test Method / Conditions Hardness 60.0 Shore A ASTM D-2240 Glass Transition Temperature 22.0 °C TMA Thermal Conductivity 0.512 W/m-K - Coefficient of Thermal Expansion (Alpha 1) 73 μ/m/°C TMA Coefficient of Thermal Expansion (Alpha 2) 235 μ/m/°C TMA - Component B
Value Units Test Method / Conditions Viscosity (at 25°C) 1000 cPs Brookfield RV Density 10.1 lb-mass/gal ASTM 0792 - Typical Properties
Value Units Test Method / Conditions Components Polyol and isocyanate - - Curing Room temperature - - Consistency Low viscosity liquid - - - Cured Properties
Value Units Test Method / Conditions Young's Modulus 2.2 Mpa ASTM D638 Tensile Strength (at Break) 9.1 Mpa ASTM D638 Elongation at Break 147.6 % ASTM D638 - Uncured Properties
Value Units Test Method / Conditions Viscosity (Blend, at 25°C) 2000 cPs Brookfield Blend Ratio (by volume) 100:27.8 - - Blend Ratio (by weight) 100:25 - - Density (Blend) 11.0 lb-mass/gal ASTM 0792 Gel Time (at 25°C) 9 minutes -
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 180 Days (Component B), 365 Days (Component A)
- Storage and Shelf Life
Components should be stored in a cool, dry area. The B-component should be kept in a tightly sealed container flushed with nitrogen.