Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Base
Epoxy
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Mixing and Curing
Mixing and Curing Schedule
Ratio Part A Part B By weight 100 86 By volume 1 1 The recommended cure schedule to achieve the typical properties is 5 days at 25°C/77°F. Properties will be slightly altered if exposed to elevated temperature post-cure.
Properties
- Physical Properties
Value Units Test Method / Conditions Tensile Elongation (at 25°C, at break) avg. 14.3 % - Glass Transition Temperature 53 °C by TMA Tensile Strength (at 25°C) 4492.0 psi average - Coefficient of Thermal Expansion (at 30 - 40°C) 111.8 ppm/°C - - Component A
Value Units Test Method / Conditions Viscosity (at 25°C) 34000 cPs - Weight per Gallon 9.1 lbs - Specific Gravity (at 25°C) 1.18 - - - Component B
Value Units Test Method / Conditions Viscosity (at 25°C) 23000 cPs - Weight per Gallon 8.42 lbs - Specific Gravity (at 25°C) 1.01 - - - Uncured Properties
Value Units Test Method / Conditions Gel Time (at 25°C, 200g, mixed) 54 minutes - Tack-Free Time (Blend, 40mil layer, at 25°C) 180 minutes - Specific Gravity (at 25°C, blend) 1.09 - - Color (Blend) Green - - Viscosity (Blend, at 25°C) 27000 cPs - Weight per Gallon (Blend) 8.85 lbs - - Typical Cured Properties
Value Units Test Method / Conditions Tensile Lap Shear (at 25°C, 5 day cure, 5mil bondline thickness, solvent wiped aluminum) 2173 psi - Tensile Lap Shear (at 25°C, 5 day cure, 5mil bondline thickness, scoured aluminum) 2413 psi - Tensile Lap Shear (at 25°C, 5 day cure at 25°C, 5mil bondline thickness, sandblasted cold rolled steel) 3203 psi -
Safety & Health
- Safety Information
Although the system contains low volatility materials, care should be taken in handling. Use adequate ventilation in the work area. These materials may cause dermatitis in susceptible individuals. Keep off skin and out of eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush eyes thoroughly with water and consult a physician immediately.
Packaging & Availability
- Packaging Type
- Regional Availability
- Typical Packaging
- 200 mL Cartridge
- 5 gallon Pail
- 55 gallon Drum
Storage & Handling
- Shelf Life
- 12 Months
- Storage and Shelf Life
These materials should be stored in a dry environment within a temperature range of 16 °C to 27 °C (60 °F to 80 °F). Extremes of temperature beyond this range may result in crystallization or polymerization of the materials. Introduction of a nitrogen blanket into the containers before closing will improve the storage life of the products.