Swift®col 9798

• very soft and transparent dry film
• very high adhesion with good cohesion and medium heat resistance
• dry film permanent tack, odorless, slightly yellowish

Suitable to produce tapes or labels.

Suitable Substrates: Plastic films (Polyethylene, Polypropylene, Polyester, etc.); natural and synthetic textile; paper; expanded materials (PU, PE, PU).

Application Instructions: This product should be coated directly on the final substrates by common coating system like fixed or rotating doctor blade system, transfer roll or reverse roll. If needed the adhesive can be applied by transfer from silicon paper or release liner after complete evaporation of solvents. Drying is a very important operation before laminating or rewinding process: traces of solvent in the adhesive layer will give products with characteristics different from the standard. This adhesive can be diluted with different solvents such as toluene or mix of aliphatic hydrocarbons. Solvents must be anhydrous.

Cleaning Instructions: For cleaning of machineries and tools we suggest the use of acetone since this solvent coagulate the adhesive and help its removal.

The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Remaining below recommended temperature the product is again useable after rewarming. Do not expose to heat.