H.B. Fuller® NW-1043-DR
1 of 389 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Sanitary Napkins
Compatible Substrates & Surfaces: Polyethylene (PE)
Features: High Peel Values, Light Color, Low Application Temperature, Low Viscosity
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instruction
-
Application temperature: 325°F
- Applications and Usage Information
-
- Positioning of sanitary napkins onto under garments.
- Application temperature: 325°F
- Cleaning Instructions: Consult the equipment manufacturer for cleanup procedures. After clean- up, flush the applicator thoroughly with hot melt to purge the system.
- Product Applications
-
Positioning of sanitary napkins onto under garments.
- Suitable Substrates
-
Breathable and non-breathable PE films.
Features
- Ready-to-Use Product Features
Features & Benefits
- Characteristics
-
This product is a light-colored, clear, low-viscosity positioning adhesive for sanitary napkins. It can be applied at low temperatures and exhibits high peel values with no transfer.
- Product Characteristics
-
This product is a light-colored, clear, low-viscosity positioning adhesive for sanitary napkins. It can be applied at low temperatures and exhibits high peel values with no transfer. FDA STATUS: A letter is available upon request.
Packaging & Availability
- Regional Availability
Properties
- Suitable Substrates
-
Breathable and non-breathable PE films.
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 325 °F - Softening Point 210 °F - Specific Gravity 0.96 - - Storage Temperature max. 140 °F - Viscosity (at 250°F) 30000 cPs - Viscosity (at 275°F) 6500 cPs - Viscosity (at 300°F) 2250 cPs - Viscosity (at 325°F) 1250 cPs - Viscosity (at 350°F) 850 cPs -
Safety & Health
- Safety Information
-
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Storage Conditions
-
Clean and dry conditions below 140°F.
- Storage and Shelf Life Conditions
-
- Clean and dry conditions below 140°F.
- Shelf life: 730 days
- Shelf Life
-
730 days