H.B. Fuller® NW-1023-AAZP
1 of 389 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Lamination
Compatible Substrates & Surfaces: Non-Woven Fabric, Polyethylene (PE)
Features: Excellent Spray Performance, Robust Bonding Performance
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instruction
-
Application temperature: 290°F An inert gas blanket is recommended while the adhesive is molten to ensure the best retention of physical properties.
- Applications and Usage Information
-
- Nonwoven laminations for healthcare products.
- Application temperature: 290°F An inert gas blanket is recommended while the adhesive is molten to ensure the best retention of physical properties.
- Cleaning Instructions: Consult the equipment manufacturer for clean-up procedures, or flush the unit with mineral oil at 250°F. After clean-up, flush the applicator thoroughly with hot melt to purge the system.
- Product Applications
-
Nonwoven laminations for healthcare products.
- Suitable Substrates
-
Polyethylene films, nonwoven fabrics.
Features
- Ready-to-Use Product Features
Features & Benefits
- Characteristics
-
Excellent spray and bonding performance.
- Product Characteristics
-
Excellent spray and bonding performance.
Packaging & Availability
- Regional Availability
Properties
- Suitable Substrates
-
Polyethylene films, nonwoven fabrics.
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 290 °F - Density 0.96 g/cm³ - Softening Point 190 - 210 °F Mettler, ASTM D3461 Storage Temperature max. 140 °F - Viscosity (at 275°F) 11500 cPs - Viscosity (at 300°F) 2900 cPs - Viscosity (at 325°F) 1950 cPs - Viscosity (at 350°F) 1250 cPs -
Safety & Health
- Safety Information
-
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Storage Conditions
-
Clean and dry conditions below 140°F.
- Storage and Shelf Life Conditions
-
- Clean and dry conditions below 140°F.
- Shelf life: 730 days
- Shelf Life
-
730 days