H.B. Fuller® MM-250

Identification

Carrier

Water

GBU

HHC

RTU Product Type

Waterborne Adhesive

Categories

Markets → Printing & Packaging → Applications → Tapes, Labels & Adhesives → Case & Carton Sealing

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Water-Based Adhesives

Applications

Application Area

Cartons,

Case Sealing

Compatible Substrates & Surfaces

Corrugated Board

Segment

Case and Carton Sealing

Applications & Uses

Application Instruction

Recommended application temperature: 250°F

Applications and Usage Information

• EOL Packaging: Case and Carton seal.
• Application Instructions Recommended application temperature: 250°F
• Cleaning Instructions Consult the equipment manufacturer for clean-up procedures. After clean- up, flush the applicator thoroughly with hot melt to purge the system.

Product Applications

EOL Packaging: Case and Carton seal.

Suitable Substrates

Virgin and/or recycled corrugated board, and a variety of lightly coated/uncoated carton stock.

Features

Ready-to-Use Product Features

Fast Setting,

Good Adhesion,

Light Color,

Water-based,

Low Application Temperature,

Excellent Pot Stability,

Good Machining Characteristics

Features & Benefits

Characteristics

• Low temperature application
• Extended pot stability
• Lower color
• Excellent adhesion
• Fast setting
• Good machining

Product Characteristics

• Low temperature application
• Extended pot stability
• Lower color
• Excellent adhesion
• Fast setting
• Good machining

Packaging & Availability

Regional Availability

• North America

Properties

Suitable Substrates

Virgin and/or recycled corrugated board, and a variety of lightly coated/uncoated carton stock.

Typical Properties

	Value	Units	Test Method / Conditions
Application Temperature	250	°F	-
Color (molten)	3 - 5	Gardner	-
Softening Point	150 - 170	°F	Mettler
Speed of Set (relative)	Fast	-	-
Storage Temperature	20 - 140	°F	-
Viscosity (at 250°F)	700 - 959	cPs	-

Safety & Health

Safety Information

To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.

Storage & Handling

Storage Conditions

Clean and dry conditions above 20°F and below 140°F.

Storage and Shelf Life Conditions

• Clean and dry conditions above 20°F and below 140°F.
• Shelf life: 730 days

Shelf Life

730 days