Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application Instructions
When used with foamed hot melt application equipment the temperature settings throughout the system may vary from 250-300 F, depending on the design and output variables. Technical assistance may be required.
Equipment: Any hot melt application equipment capable of maintaining the suggested adhesive temperature noted above at the required melt rates.
Directions:
- Flush previous hot melt out of equipment following recommended procedures.
- Adjust application equipment to above suggested temperatures.
- If pre-melting options are used, set this function at the lowest possible temperature and still be able to maintain the required adhesive temperature and melt rate.
- The open time of this product may be increased slightly by raising the application temperature and decreased slightly by lowering the application temperature within a small range of temperature changes.
- Adjust pump pressure for desired bead diameter (line speed and extrusion nozzle orifice affect bead diameter in conjunction with pump pressure).
Precautions: ZEROPACK film is not compatible with this foamable hot melt sealant. ZEROPACK serves only as a removable container for this product. Slit the ZEROPACK film and empty the pillows into the melt hopper. Inclusion of the ZEROPACK film into the application equipment may result in substandard foam quality
Properties
- Color (Properties)
- Physical Form
- Appearance
- Off white liquid
- Material Specifications
Value Units Test Method / Conditions Roll Coater Open Time 45 - 60 s - Solid Content 100.0 % - Mettler Softening Point 207.0 °F ASTM D3461 Application Temperature 265.0 °F - - Rheological Properties
Value Units Test Method / Conditions Viscosity (at 275°F) 4250.0 cP - Viscosity (at 300°F) 1300.0 cP -
Safety & Health
- Safety Advice
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature of 400 F. Prevent the buildup of vapors. Extinguish all sources of ignition during hot melt use. Use in a well-ventilated area.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 24 Months
- Storage Conditions
We suggest that this product be stored in containers in an upright position in areas where ambient temperatures will not exceed 100ºF. Storage of this product at temperatures exceeding 100°F may cause the product to block together, creating handling difficulties.