H.B. Fuller HL5140

Identification

GBU

EA

RTU Product Type

1K (1 component) Sealant,

Solvent free (100% Solids) Sealant

Categories

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → 1K (1 Component) Sealants

Technologies → Adhesives & Sealants → Product Families → Sealing Technology → Solvent-free Sealants

Applications

Application Area

Insulating Glass,

Spacer

Compatible Substrates & Surfaces

Glass

Applications & Uses

Usage Information

• Processing

Surfaces should be dry, clean, and free from dust or grease. A cleaning agent such as Körasolv GL and/or the glass and spacer manufacturer’s recommended procedures are appropriate for surface preparation. It is important to ensure that sealant is applied to the correct dimensions required for your application. Ensure recommended application temperature is maintained at the application nozzle to prevent cold joints and poor adhesion.

• Clean Up

Körasolv GL or common solvents such as mineral spirits or acetone.

Features

Ready-to-Use Product Features

Good Adhesion,

Good Barrier Properties,

Good Flexibility,

Intercept

Features & Benefits

Labeling Claims

Solvent-free

Product Characteristics

HL-5140 is a 100% solids, one-component insulating glass sealant engineered for exceptional adhesion to IG glass and spacer as well as strong barrier properties. HL-5140 brings the following to the IG industry:

• Excellent adhesion to insulating glass components
• Flexibility of use with any IG manufacturing system
• Meets and/or exceeds ASTM E2190 and CGSB 12.8 standards

Packaging & Availability

Regional Availability

• North America
• Latin America

Packaging Information

• 55 gal straight-sided drum, 450 lb (204.12 kg)
• 5 gal pail, 39 lb (17.69 kg)
• 8”x6”x4” cake, case of 8, 50 lb (22.68 kg)
• 8”x41⁄4”x3” cake, case of 18, 50 lb (22.68 kg)

Physical Properties

Physical Form

Solid

Properties

Application Temperature:

115.0~132.0 °C

Density:

1126.402 kg/m³

Shear Strength:

0.28938 MPa

Shelf Life:

24.0 months

Specific Gravity:

1.12706

Tensile Strength:

0.22048 MPa

Typical Physical Properties

	Value	Units	Test Method / Conditions
Application Temperature (hand gun/automated line)	190 - 204	°C	-
Application Temperature (linear extruder)	115 - 132	°C	-
Argon Permeability (argon gas)	75	cc/m²day	Internal Test Method
Density	9.4	lb/gal	-
Moisture Vapor Transmission Rate	0.63	g/m²day	ASTM F-1249
Peel Strength	36	psi	-
Recommended Press Bond Temperature	min. 200°F	°F	GED APN-0189
Shear Strength	42	psi	-
Tensile Strength (100% elongation)	32	psi	-

Regulatory & Compliance

Quality Standards

ASTM E2190,

CGSB 12.8

Safety & Health

Safety Conditions

Extreme care should be exercised when working with hot or warm melts in their fluid state. Use eye protection and thermally protective clothing. Use in a well-ventilated area and do not exceed 450°F.

Storage & Handling

Storage and Shelf Life Conditions

Store in a cool, dry, clean place. Packaging must be kept sealed and protected from moisture. Product may be stored in this manner for 24 months from date of manufacture.

Shelf Life

24 months