H.B. Fuller® HL-7167
1 of 389 products in this brandRTU Product Type: Hot Melt Adhesive
Application Area: Muti-Wall Bags
Compatible Substrates & Surfaces: Plastic Film
Features: Good Bond Strength
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instruction
-
Recommended application temperature: 350°F
- Applications and Usage Information
-
- Muti-wall Bags - Seams.
- Recommended application temperature: 350°F
- Cleaning Instructions Consult the equipment manufacturer for cleanup procedures. After clean- up, flush the applicator thoroughly with hot melt to purge the system.
- Product Applications
-
Muti-wall Bags – Seams.
- Suitable Substrates
-
Various plastic films.
Features
- Ready-to-Use Product Features
Features & Benefits
- Characteristics
-
Good bond strength
- Product Characteristics
-
Good bond strength
Packaging & Availability
- Regional Availability
Properties
- Suitable Substrates
-
Various plastic films.
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 350 °F - Color (molten) 5 - 11 Gardner - Mettler Softening Point 180 - 200 °F - Programmed 100 Gram Oven Peel (100-gram oven peel) 105 - 113 °F - Programmed Oven Shear 105 - 113 °F - Rate of set Slow - - Softening Point 180 - 200 °F Mettler Storage Temperature max. 140 °F - Viscosity (at 350°F) 6540 - 8500 cPs - Viscosity (at 400°F) 3600 cPs -
Safety & Health
- Safety Information
-
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Storage Conditions
-
Clean and dry conditions below 140°F.
- Storage and Shelf Life Conditions
-
- Clean and dry conditions below 140°F
- Shelf Life: 730 days
- Shelf Life
-
730 days