H.B. Fuller® HL-3363
1 of 389 products in this brandH.B. Fuller® HL-3363 is a hot-melt adhesive that provides superior adhesion and low viscosity for bookbinding and other adhesive applications. It is compatible with paper substrates, offering excellent bond strength and clean machining. This product is designed for use in the printing and packaging industry, particularly for applications like side gluing and joint/hinge gluing. HL-3363 is also effective for pressure-sensitive applications and offers excellent performance in a range of environments.
Compatible Substrates & Surfaces: Paper
Features: Good Adhesion, Low Viscosity
Enhanced TDS
Identification
- GBU
- RTU Product Type
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instruction
-
Suggested application temperature: 350°F
- Applications and Usage Information
-
- Bookbinding; side gluing, backlining, joint/hinge gluing.
- Suggested application temperature: 350°F
- Cleaning Instructions: Consult the equipment manufacturer for cleanup procedures. After clean-up, flush the applicator thoroughly with hot melt to purge the system.
- Product Applications
-
Bookbinding; side gluing, backlining, joint/hinge gluing.
- Suitable Substrates
-
Most paper stocks associated with bookbinding applications.
Features
- Ready-to-Use Product Features
Features & Benefits
- Product Benefits
-
- Permanent pressure sensitive adhesive
- Aggressive adhesion
- Low viscosity
- Fast melt rate
- Product Benefits
-
- Permanent pressure sensitive adhesive
- Aggressive adhesion
- Low viscosity
- Fast melt rate
Packaging & Availability
- Regional Availability
Properties
- Suitable Substrates
-
Most paper stocks associated with bookbinding applications.
- Typical Properties
-
Value Units Test Method / Conditions 180° Peel (at 73°F, 60sec, 1 mil) 3.3 - 6.3 lbs/inch - Application Temperature 350 °F - Color (molten) 3 - 5 Gardner - Mettler Softening Point 165 - 185 - - Shear Adhesion Failure Tester (500 gms/in² load) 133 - 153 - - Softening Point 165 - 185 °F Mettler Specific Gravity 0.98 - - Storage Temperature max. 140 °F - Viscosity (at 300°F) 3960 cPs - Viscosity (at 350°F) 940 - 1410 cPs - Viscosity (at 400°F) 610 cPs -
Safety & Health
- Safety Information
-
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Storage Conditions
-
Clean and dry conditions below 140°F.
- Storage and Shelf Life Conditions
-
- Clean and dry conditions below 140°F
- Shelf Life: 730 days
- Shelf Life
-
730 days