H.B. Fuller® HL-1358-LOFZP

Identification

GBU

HHC

RTU Product Type

Hot Melt Adhesive

Categories

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Hot Melt Nonreactive Adhesives

Applications

Application Area

Nonwoven Converting

Segment

Hygiene

Applications & Uses

Application Instruction

Application temperature: 300°F

Applications and Usage Information

• Construction adhesive in the nonwoven converting industry.
• Application Instructions: Application temperature: 300°F
• Cleaning Instructions Consult the equipment manufacturer for cleanup procedures. After clean- up, flush the applicator thoroughly with hot melt to purge the system.

Product Applications

Construction adhesive in the nonwoven converting industry.

Suitable Substrates

Various nonwoven converting stock.

Features

Ready-to-Use Product Features

Light Color,

Low Temperature Performance

Features & Benefits

Characteristics

• low temperature
• low color

Product Characteristics

• low temperature
• low color

Packaging & Availability

Regional Availability

• North America

Properties

Notes

• ⁵ In iron oxide black pigments, a chemical transformation (oxidation) is also recorded when determing the loss on ignition.
• ⁴⁵ Color values after matching of the tinting strength parameter Y, i.e. Δ L*=0  
• ⁵³ Minor elements may arise from the raw materials used. However, these are firmly bound to the crystal lattice as ions.

 

Suitable Substrates

Various nonwoven converting stock.

Typical Properties

	Value	Units	Test Method / Conditions
180° Peel (at 73°F, 60sec, 1 mil)	5.7 - 7.7	lbs/inch	-
Application Temperature	300	°F	-
Color (molten)	1 - 5	Gardner	-
Shear Adhesion Failure Tester (500 gms/in² load)	138 - 152	°F	-
Softening Point	180 - 202	°F	Mettler
Storage Temperature	max. 140	°F	-
Viscosity (at 275°F)	6250	cPs	-
Viscosity (at 300°F)	2500 - 3750	cPs	-
Viscosity (at 325°F)	1875	cPs	-

Safety & Health

Safety Information

To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.

Storage & Handling

Storage Conditions

Clean and dry conditions below 140°F.

Storage Conditions

General storage conditions:

• Protect against weathering.
• Store in a dry place and avoid extreme fluctuations in temperature.

Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.

Shelf life:

• If stored under the correct conditions (no climatic influence, kept dry and no extreme fluctuations in temperature) our products have an excellent shelf life.
• However, due primarily to the limited durability of the packaging, we recommend that the product is used within 5 years of the date of manufacture and our product warranty is limited to this period. 
• During the first five years after the date of manufacture we are able to ensure compliance with our specification, provided the material has been stored correctly and the packaging materials remain undamaged.

Storage and Shelf Life Conditions

• Clean and dry conditions below 140°F
• Shelf Life: 730 days

Shelf Life

730 days