H.B. Fuller® CHM-1078AZP

Identification

GBU

HHC

RTU Product Type

Hot Melt Adhesive

Categories

Technologies → Adhesives & Sealants → Product Families → Bonding Technology → Hot Melt Nonreactive Adhesives

Applications

Application Area

Diapers

Application Method

Spray,

Spiral

Segment

Hygiene

Applications & Uses

Application Instructions

Recommended operating temperature: operating temperature 140°C to 160°C, depending on customer equipment.
Recommended coating method: suitable for hot melt slit scraping, multi-line, spiral spray system, etc.

Application Instructions

Application Temperature : Between 120°C and 140°C depending on the operating conditions.

Application Methods : Can be run on all standard hot melt systems.

Features

Ready-to-Use Product Features

Wet Bond Strength,

Dry Bond Strength

Packaging & Availability

Regional Availability

• Asia Pacific

Typical Packaging

20 Kg/box or as required by the customer.

Typical Packaging

20 Kg/bag, or as required.

Physical Properties

Appearance

Pillow-shaped

Properties

Characteristics

	Value	Units	Test Method / Conditions
Application Temperature	140 - 160	°C	-
Color Scale	approx. 1	Gardner	-
Softening Point	approx. 88	°C	-
Viscosity (at 120°C)	approx. 7600	mPa.s	Brookfield
Viscosity (at 140°C)	approx. 3150	mPa.s	Brookfield
Viscosity (at 160°C)	approx. 1550	mPa.s	Brookfield
Viscosity (at 180°C)	approx. 800	mPa.s	Brookfield

Typical Properties

	Value	Units	Test Method / Conditions
Storage Temperature	max. 40	°C	-

Safety & Health

Safety Information

Precautions:

• Do not mix with other adhesives.
• The hot melt adhesive tank must be tightly covered to prevent debris from falling into it and affecting the performance of the adhesive.
• As the hot melt adhesive must be heated when used, personal protective equipment must be worn.

Safety Information

• Material is applied hot-appropriate clothing and eye protection should be used.
• Use adequate ventilation to remove any hot melt fumes or vapors that are generated.
• Keep containers and premelters covered to avoid contamination.

Storage & Handling

Storage Conditions

Store in a closed container at a temperature below 40°C and avoid direct sunlight.

Storage Conditions

Store under ambient conditions preferably below 40°C and above 0°C to avoid water condensation. The shelf life is minimum 12 months under recommended conditions.

Shelf Life

12 months