H.B. Fuller AP-1 Adhesion Promoter

H.B. Fuller AP-1 Adhesion Promoter is designed to work in conjunction with H.B. Fuller's acrylic pressure-sensitive tape bonding systems. It is specifically designed for general use on PVC, metals, and paint systems. This product will not stop plasticizer migration from various plastics, such as PVC.

Functions: Adhesion Promoter, Coupling Agent

Compatible Polymers & Resins: Acrylics, Polyvinyl Chloride (PVC)

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Features and Benefits

AP-1 leaves an acrylic polymer film on the surface of the material to which it is applied which our acrylic tapes will adhere to.

Applications & Uses

Markets
Applications
Compatible Polymers & Resins
Compatible Substrates & Surfaces
Typical Applications
  • AP-1 is used as an adhesion promoter for H.B. Fuller's high performance acrylic bonding tapes. These tapes are available in a variety of adhesive and core combinations to efficiently match assembly and mounting needs. Contact H.B. Fuller to select the right tape for the intended application.
General Instructions

1.Substrate Evaluation: Acrylic adhesive is suitable for bonding avariety of substrates, including many plastic composites, sealedwood, and metals. Low surface energy materials such aspolyethylene, polypropylene, silicones and PTFE can be difficult tobond to. Thorough evaluation is recommended when bonding toany questionable surface. An adhesion promoter (primer) for usewith pressure sensitive acrylic adhesives may be necessary tofacilitate proper bonding, and is available from H.B. Fuller.

2.Preparation of Substrate: The substrate to be bonded should becleaned with an appropriate solvent, preferably isopropanol (IPA).The acrylic adhesive backed part should be applied within 15minutes of cleaning. To ensure removal of all contaminants withoutleaving any residue, use a clean, lint-free wiping cloth or disposablewipe. Never use recycled rags. Other solvents such as hexane,heptane, or methanol may be suitable for cleaning varioussubstrates after thorough evaluation. The substrate must becompletely dry through evaporation of the solvent with radiantheat, hot air dryers, or with time before bonding acrylic adhesivebacked parts.

3.Adhesive Promoter Application: Apply the AP-1 AdhesionPromoter to the substrate(s) either with a lint-free applicator orfoam brush. Apply the Adhesion Promoter in a “wet” laydownthickness range of 1-8 mils. Allow the Adhesion Promoter to dryapproximately 5 minutes. Don’t touch the Adhesion Promoter.

4.Application of Adhesive Backed Part to the Substrate: Removethe protective release liner from the acrylic tape immediately priorto applying the part to be bonded, being careful not to contaminatethe acrylic adhesive. Apply within 15 minutes after surfacepreparation. Apply the part to be bonded without entrapping airbetween the tape and the substrate with a recommendedminimum application pressure of 15 pounds per inch of tape widthto achieve adhesive to substrate contact and maximum bondstrength.

Properties

Physical Form
Technical Data
ValueUnitsTest Method / Conditions
Solid Content1 - 2%ASTM C681
Flash Point-3.0°CASTM D56
Specific Gravity0.9-ASTM D1475

Technical Details & Test Data

Technical Data

The recommended range for “wet” laydown thickness is 1 - 8 mils. Review the general instructions section before applying the adhesion promoter.

Packaging & Availability

Packaging Type
Available Packaging
  • 1 gallon cans

Storage & Handling

Storage Conditions

Store material in original unopened packaging at temperatures between 4°C to 38°C (40°F to 100°F). Shelf life is 12 months when stored as recommended.