FULLABOND M 100LV
1 of 37 products in this brandFULLABOND M 100LV is a fast-setting carton sealing adhesive with a lower viscosity compared to other options. This adhesive is specifically designed for efficient carton formation using medium to high-speed equipment and standard corrugated board. FULLABOND M 100LV offers several benefits, including high initial tack, good grab, and a very fast set speed, ensuring quick and reliable bonding. It exhibits excellent flow through a cascade system, with minimal to no skinning, allowing for smooth and uninterrupted operations. Typical applications for FULLABOND M 100LV include case sealing and the production of cores for tissue or towel, among others. This adhesive is a reliable choice for achieving strong and secure carton seals in various packaging applications.
Application Method: Beugler Wheel, Dip Coating, Doctor Blade, Extrusion, Nozzle, Slot-Die, Wheel
Features: Cost Effective, Fast Grab, Fast Setting, Good Flow, High Initial Tack, Low Viscosity, Non-Skinning, Wet Tack
Enhanced TDS
Identification
- Country of Origin
- GBU
- Categories
Applications
- Application Area
- Application Method
- Segment
Applications & Uses
- Limitations
-
Check machine and material compatibility prior to commercial use.
- Product Application
-
- Fullabond M100LV is designed to be applied by nozzle or wheel and runs on most types of carton sealing and core winding equipment.
- Clean up adhesive while wet with warm water.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Benefits of Corewinding Application
-
- Up to a 25% reduction in applied adhesive
- Line speeds of 60+ cores/min
- Ability to bond a wide range of corestock material
- Ability to use one adhesive for both one- and two-ply cores
- High wet tack solutions allow for easier coremaking startups, reducing waste
- High tack solutions can also help to eliminate the need to run an overlap, thus reducing paper expense
- Adhesives designed to help with machine hygiene
- Boric acid-free options
- Solutions that are proven in all application systems: Wheel & Doctor blade, Slot extrusion, Flood coat
- Product Benefits
-
Fullabond M100LV has high initial tack, good grab and a very fast set speed. Good flow through a cascade system with little to no skinning.
Packaging & Availability
- Regional Availability
Properties
- Density:
-
1060 kg/m³
- Shelf Life:
-
6 months
- Solid Content:
-
48~52 %
- Viscosity:
-
1800~2000 cps
- Typical Properties
-
Value Units Test Method / Conditions Raw Material Base Synthetic polymer emulsion - - Solids Content 48 - 52 % - Specific Gravity approx. 1.06 - - Storage Temperature 5 - 30 °C - Viscosity 1,800 - 2,000 cPs -
Storage & Handling
- Storage Condition
-
- Product should be stored in the original container out of direct sunlight between 5°C and 30°C and protected from freezing.
- Rotate stock using oldest batches first.
- Close containers air tight after use.
- Shelf Life
-
6 months