Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Surface Preparation
Surfaces must be clean and free from dust, fatty substances and release agents. For optimum adhesion, the surface tension of the substrates to be bonded should be more than 38 dynes/cm.
- Application Instructions
- Place adhesive film between substrates.
- Cure Activation Conditions
- Temperature: 90°C - 110°C Activation
- Time: 60s - 90s at temperature
- Pressure: 20 - 25 N/cm²
- We recommend uniform pressure distribution for optimal bonding
- The glued materials can be further processed immediately after bonding and cooling down (handling, trimming, cutting, etc.).
- Optional step: FN2100 adhesive film may be pre-tacked to a substrate prior to processing. To pre-tack FN2100 to a material, use the processing guide lines below:
- Bond Line Temperature: 45 - 50°C
- Pressure: 5 - 20 N/cm²
Properties
- Color (Properties)
- Physical Form
- Typical Properties
Value Units Test Method / Conditions Activation Temperature 90 - 110 °C - Specific Gravity 1.12 - - Solid Content 100.0 % - Glass Transition Temperature (by DMA) -46.0 °C - Standard Film Thickness 50, 100 μm - Tacking Temperature 45 - 55 - - Typical Peel Strength (on Polycarbonate) 70 - 75 N/25 mm - Typical Peel Strength (on SUS 304) 70 - 75 N/25 mm -
Technical Details & Test Data
- Typical Shear Strength
Note: Pulled at crosshead speed of 30 mm/min. Shear area is 25 mm x 12 mm. Samples were pressed for 60 seconds at bond line temperature of 90°C and pressure of 22N/cm². Shear samples were conditioned for 24 hours at 50 % RH and 23°C before testing.
- Typical Peel Strength
Note: Peeled at crosshead speed of 300 mm/min. Samples were pressed for 60 seconds at bond line temperature of 90°C and pressure of 22N/cm². Peel samples were conditioned for 24 hours at 50 % RH and 23°C before testing.
Packaging & Availability
- Regional Availability
Storage & Handling
- Shelf Life
- 6 Months
- Storage Condition
FN2100 should be stored in a cool, dry place. Store below 30°C.