EA6120
1 of 389 products in this brandEA6120 is a UV/moisture dual-cured adhesive designed for structural bonding of metals, glass, and other engineering-grade materials. It offers fast curing under UV light, providing exceptional bond strength and flexibility. Additionally, the adhesive can cure in shadowed areas through moisture exposure, ensuring thorough curing even in hard-to-reach spots.
RTU Product Type: 1K (1 component) Adhesive, Light Curing Adhesive, Radiation Curable Adhesive
Compatible Substrates & Surfaces: Glass, Metal
Chemical Family: Acrylics & Acrylates
Features: Fast Curing, Good Bond Strength, Good Flexibility
-
Type Document Name
-
Technical Data SheetEA6120 Technical Data Sheet
Enhanced TDS
Identification
- Chemical Family
- GBU
- RTU Product Type
- Categories
Application Information
- Cure Method
Applications
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Application Instructions
-
- Coating surface area should be clean and free of any fluxes, residues, dust or any other contaminants.
- A UV lamp with a wavelength of 365nm is required. The UV light should be focused towards the coated surface.
- Curing speed is determined by the intensity of UV radiation, the distance from the UV light source and the coating surface. The depth of coating material can also require additional cure time.
- Immediately close the lid after use. A black hose must be used to dispense the adhesive.
- This material should be stored away from sunlight, UV light and artificial light sources.
Features
- Ready-to-Use Product Features
Features & Benefits
- Features and Benefits
-
- UV fast cure
- Fluorescence
- Moisture cure
- One component, no mixing required
- High bond strength on glass and metal
- Excellent flexible
Packaging & Availability
- Regional Availability
Properties
- Curing Condition
-
- Recommended cure:
- Cured at 365nm UV-LED for 10s
- Moisture cured at RT for 3 days
- Uncured Properties
-
Value Units Test Method / Conditions Density 1.1 g/cm³ - TI (at 1rpm/10rpm) 2.5 - - Viscosity (at 25°C, CP 52, 10rpm) 3600 cPs - - Cured Properties
-
Value Units Test Method / Conditions Elongation at Break 130 % - Hardness (after 1 day) 47 Shore D - Hardness (after 3 days) 48 Shore D - Hardness (after 5 days) 48 Shore D - Hardness (after 7 days) 48 Shore D - Hardness (initial cured) 37 Shore D - OLSS (PC/PC, after 1 day) 8.1 MPa - OLSS (PC/PC, after 3 days) 8.5 MPa - OLSS (PC/PC, after 5 days) 8.5 MPa - OLSS (PC/PC, after 7 days) 8.5 MPa - OLSS (PC/PC, initial cured) 7.9 MPa - Tensile Strength (fully cured) 11.6 MPa - - Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 2 - 8 °C -
Storage & Handling
- Storage Information
-
- Product should be stored at temperature between 2- 8 °C in the unopened container in a dry location.
- Shelf Life
-
6 months