Cyberbond CB AT 1740 PP-PE Bonder

1 of 84 products in this brand
Cyberbond CB AT 1740 PP-PE Bonder is a two-component methacrylate adhesive specifically designed for bonding polyethylene and polypropylene substrates without any pretreatment. It has a short open time, thixotropic consistency, and a mixing ratio of 10:1, making it easy to apply and providing excellent bonding performance.

Product Type: 2K (2 component) Adhesive, Reactive Adhesive

Compatible Substrates & Surfaces: Metal, Plastics, Polyethylene (PE), Polypropylene (PP)

Chemical Family: Acrylics, Acrylates & Methacrylates

Features: Good Adhesion, Short Open Time, Thixotropic, Weak Acid Resistant, Weak Base Resistant

Technical Data Sheet

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
General Information about MMA adhesives

2-component methacrylate adhesives belong to the group of reactive adhesives. The reaction starts by mixing hardener and resin. Cyberbond offers these adhesives in double cartridges in 1:1 or 10:1 ratio with static mixing tubes. This allows an easy and quick application. Methacrylate adhesives are available in different viscosities from liquid to paste-like and with different curing times. They are characterized by excellent adhesion to metals, many plastics and composite materials. The mechanical properties range from flexible to rigid.

Applications & Uses

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Density (A/B, Liquid state)1.07g/cm³-
Mixing Ratio (Liquid State)10:1--
Open Time (Liquid State)2 - 3minutes-
Fixture Time (Liquid State)10 - 15minutes-
Full Cure Time (Polymer)24.0hours-
Temperature Range (Polymer)-40 - 120°C-
Viscosity (Cone/plate, at 20°C, 0.5 s-1)200.000 - 400.000mPa.s-

Regulatory & Compliance

Certifications & Compliance

Technical Details & Test Data

Technical Information
Adhesive performance Tensile Shear Strength
Substrate N/mm²
Tensile shear strength (Polypropylene PP, Substrate Failure) 2,5 - 4
Tensile shear strength (Polyethylene PE, Substrate Failure) 2,5 - 4
Tensile shear strength (PP to Stainless Steel, Substrate Failure) 5 - 6
Tensile shear strength (PE to Stainless Steel, Substrate Failure) 3 - 4
Tensile shear strength (PP to Aluminum, Substrate Failure) 5 - 6
Tensile shear strength (PE to Aluminum, Substrate Failure) 3 - 4

 

Tensile Shear Strength

Cyberbond CB AT 1740 PP-PE Bonder - Technical Information

 

Resistance Against Solvents

Solvent Resistance
Weak acids very good
Weak bases very good
Polar solvents limited
Strong acids and bases limited

 

Measurement of Viscosity

Viscosity describes the flow-ability of a liquid. Cyberbond measures the viscosity of the products by means of the cone/plate method: the liquid is applied on a panel and a defined cone presses the liquid together and rotates. Newtonian fluids are measured at shear rate 160 s-1, thixotropic products are measured at shear rate 0,5 s-1 and 160 s-1. The viscosity is measured in mPa*s at 20 °C.

Safety & Health

Safety Information
  • Keep the workplace clean and use in well ventilated areas only. Installll suitable exhaust system at the workplace.
  • Wear suitable safety glasses and gloves.
  • Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.

Packaging & Availability

Packaging Type
Regional Availability
  • Africa
  • Europe (Excluding Russia)
  • India
  • Middle East

Storage & Handling

Shelf Life
9 Months
Storage Conditions

Store products in a cold and dark place at temperatures between 10 °C to 20 °C.