Advantra® Bold™ 9435
1 of 67 products in this brandAdvantra® Bold™ 9435 is versatile hot melt adhesive for for case and carton closing applications. It performs on a wide variety of sealing applications and delivers excellent adhesion, high heat resistance, a very good thermal stability and excellent machinability. Advantra® Bold™ 9435 is food contact certified and supports sustainability with easy repulping properties.
RTU Product Type: Hot Melt Adhesive
Application Area: Cartons, Case Sealing, Folding Box, Straw Attachment, Trays
Application Method: Disc, Nozzle, Wheel
Features: Food Contact Acceptable, Good Adhesion, Good Thermal Stability, Heat Resistance, High Performance
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Segment
Applications & Uses
- Typical Applications
-
It has been developed for case & carton sealing, folding box cartons, tray erection and straw attachment. It bonds a variety of difficult to bond surfaces and is well suited for warm storage.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Application Instructions
-
- Apply by nozzle, wheel, disc. Application Temperature: 150°C – 190°C
- This hot melt is not compatible with conventional hot melts. If other adhesives have been used before, the adhesive equipment must be cleaned thoroughly.
- Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.
- Product Highlights
-
- Transparent and odourless in molten state
- Excellent heat stability
- Bonds a variety of difficult to bond surfaces
- Clean cut, no stringing, no "spinning"
- Bond demonstrates good deep freeze and excellent heat resistance
- Product Highlights
-
- Trouble-free operation
- Good thermal stability
- Easy separation in repulping process enables good board recycling
- Direct Food Contact Approved
- Strong adhesion on Medium and very fast lines
- Suitable for warm fill
Packaging & Availability
- Regional Availability
Physical Properties
- Film Appearance
-
Hard, elastic, dry
Properties
- Typical Properties
-
Value Units Test Method / Conditions Application Temperature 150 - 190 °C - Film Hard, elastic, dry - - Open Time Medium - - Softening Point approx. 110 °C ASTM E28-99, Ring and Ball Test Storage Temperature max. 35 °C - Viscosity (at 175°C, spindle 21) approx. 900 mPa.s Brookfield Viscometer Viscosity (at 175°C, spindle 21, Test method version year 1988) approx. 900 mPa.s ASTM D3236
Storage & Handling
- Storage Condition
-
In original sealed packaging protected from sun, dust, moisture, and high temperatures.
- Shelf Life
-
24 months