Advantra® 9292

• free-flowing, non-blocking granules
• excellent heat stability
• good initial strength (hot tack) for stiff high memory boards
• fast setting for fast production lines
• high adhesion on difficult surfaces
• excellent heat and good cold resistance

• High-performance on a variety of difficult to bond surfaces
• Excellent bond strength
• Fast Setting

Developed for folding boxes, case & carton sealing and tray erection with difficult to bond surfaces. It has a high service temperature and can be used for hot fill applications e.g., double wall cups for hot coffee or tea.

• Apply by nozzle.
• Application temperature: 160°C to 190°C
• Open time: short
• Setting time: very fast
• The prills product format is suitable for use in automatic feeder systems. Push bags to loosen up granules to remove blocking due to storage before filling the reservoir and ensure surrounding does not exceed +35°C.
• This hot melt with new raw material base has stronger adhesion and a lower density than conventional hot melts based on EVA, which means an excellent bonding is reached at once with high mileage. Due to this composition, the adhesive is not mixable with conventional hot melts. If other adhesives have been used before, the adhesive equipment must be thoroughly cleaned.

Applicable for a variety of difficult to bond surfaces as treated and coated cardboards.

* Typical values only, slight variations may occur but will not affect product’s meeting the standard technical parameters as stated;

Clean and dry conditions not above +35°C to prevent blocking. Store in original sealed packaging protected from sun, dust, moisture, and elevated temperatures.