Products

HydroArmor® 7720 is a latex coating that prevents water from wicking into boat flooring, bus flooring, and recreational vehicle walls. HydroArmor® 7720 can be brushed or rolled onto floor boards, the cut edges of floor boards, wall edges, and to window and wheel openings. The coating dries to form a waterproof seal that prevents moisture from wicking into the AB marine wood flooring, plywood, soft and hardwood, bead board, and the bond lines between the materials used in the construction of the RV walls.

HydroArmor® 7740 is a sprayable, latex product that is designed for use on steel, aluminum, fiberglass, and plywood. This highly fire-resistant material can be easily sprayed onto overhead and vertical surfaces to seal joints. Heavy wet film builds can be applied without causing runs, drips, or sagging at bridge seams. Because this material is filled with hollow microspheres, this coating adds little weight to vehicle bodies, even at high film builds.

HydroArmor® 7755 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. HydroArmor® 7755 is formulated to give very good corrosion protection when applied as thinly as 20 mils wet. This low viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of 30 mils or more can be applied without runs, drips, or sags.

HydroArmor® 7763 is a sprayable latex coating designed for use on aluminum, fiberglass, cold-rolled steel, galvanized steel, and most metal primers. It is formulated with additives to improve adhesion to oily metals. It provides very good corrosion protection, even when applied as thinly as 10 mils wet. This low-viscosity, sag-resistant coating can be easily sprayed onto exposed underbody areas and into restricted areas such as tubing and "hidden" areas accessible only with spray wands. Wet film builds of up to 20 mils can be applied without runs, drips, or sags.

HydroArmor® 8800BL is a sprayable water-based coating designed to quickly build a high level of water resistance. It is formulated to provide excellent adhesion to stainless steel, wood, and composite decking and to provide very good corrosion protection when applied with a wet film thickness as low as 0.020". This coating can be easily sprayed onto exposed underbody areas, and wet film builds of 0.040" can be applied without runs, drips, or sags.

HydroArmor® 7770 is a water-based latex coating that provides lightweight and sound-dampening protection. It can be easily sprayed onto overhead and vertical surfaces to seal joints effectively. This coating is highly durable, even under the harshest service conditions. It is commonly used for lap sealing and sound deadening bonding to various materials such as cold-rolled steel, galvanized steel, stainless steel, primed steel, aluminum, fiberglass, and plywood. HydroArmor® 7770 belongs to the category of water-based coatings.