ZKLT PK-903A2

1. Sizing method: spraying; Spray gun caliber 1.5-2.5mm, air pressure 0.3-0.5MPa;
2. Sizing amount: 60-120g/m 2 (adjusted according to specific substrate and bonding process);
3. Spray glue can be bonded, and then left at room temperature, generally after 24h can be foam destruction, high temperature environment can speed up the curing process.

1. Open the lid and use, no need to stir, directly pour into the watering can or access the pipeline;
2. During use, air should be avoided as much as possible and residue into the inside of the glue barrel, pipeline and glue gun;
3. Regularly clean and maintain the glue gun and pipeline, or replace the hose;
4. If conjunctiva or a small amount of impurities appear in the glue, it will not affect the bonding performance of the product, and if it causes frequent blockage of pipelines or gun blockages, it can be filtered by 120 mesh filter and then used, without affecting the bonding performance of the product;
5. There will be atomization in the sizing process, and the sizing personnel need to do a good job of corresponding protection.

Shelf life: 4 months; Anti-freeze, store in a cool and dry environment at 10°C-30°C.