Tuskbond NC EPDM Contact Adhesive - 5L Tin

Preparation:(5L)
Surfaces to be bonded should be clean, dry and free from dust or other contaminants.
Application:

• Pour the adhesive directly onto the surfaces to be bonded and spread out using a suitable tool.
• The adhesive should be spread to allow 80%-100% coverage of both surfaces with a dry coat weight of 25g/m2.
• Allow the solvents to evaporate from the adhesive (10-25 minutes depending on ambient temperature). To know when the adhesive is ready to bond, it should not transfer to a gloved hand when touched and should feel dry. Bonding the substrates before the solvents have been allowed to evaporate can cause solvent entrapment resulting in bond failures.
• Bring the two surfaces together and apply pressure evenly across the surface.

Available Sizes:

• 5L Tin

• Once the canister is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
• Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).
• For disposal of used packaging, it would need to be
• classified as packaging containing residues of/or contaminated
• by hazardous substances using waste code EWC 15 01 10*.

• Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
• Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.