Tuskbond Infusion 305 - 500ml Aerosol

• Specific development: perfect for plug building
• Reduces project time: quick and easy application with a fast drying time
• Polystyrene compatible

Preparation:(500ml)

• Use in a well Ventilated Area.
• Surfaces to be bonded should be clean, dry and dust free.
• Shake aerosol before use.

Application:

• Plan the shape of your plug on paper or using CAD software and cut the foam into the required shapes.
• Using Tuskbond 305 Foam Bonding Adhesive, bond the pieces of foam together to form the shape of the plug.
• Once the adhesive has cured, sand down the foam to shape the plug.
• Apply a suitable body filler to the plug, try and keep it as smooth as possible. If possible, leave one area free of filler to give the plug somewhere to be secured later.
• Sand down the plug to remove any high areas.
• To make the next step easier, bond the plug to a piece of timber or polypropylene.
• Using Tuskbond 305 as a one-way bond will make it easier to remove the plug later.

Available Sizes:

• 500ml Aerosol

• Once the aerosol is empty of any hazardous materials and depressurised, it can be considered as scrap metal, in accordance with the national or local waste company, under code EWC 15 01 04* (empty aerosol, non-hazardous residues).
• Canisters and aerosols that are still pressurised and contain product should be disposed of in accordance with the national or local waste company under code EWC 16 05 04* (full or partially empty aerosol).

• Protect from extremes of temperature in a controlled environment between 15 and 35°C, and away from direct sunlight. Do not stand on a cold concrete floor. Low temperatures can result in irreparable separation of the adhesive.
• Stored under the correct conditions, in original, unopened containers, the product will have a shelf life of 12 months. The adhesive will have a limited life once the container is opened.