Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Used with the primer MT3300
- Medium Viscosity
- Fast curing speed at room temperature
- High strength
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Appplication Instructions
- Surface treatment: clean the surface of silicon steel sheet with alcohol or acetone to ensure that the surface is clean. If stamping oil is needed, appropriate amount is recommended, otherwise it will affect the bonding strength after curing.
- Coating primer: if manually used, it is recommended to spray the primer evenly on the substrates, and wait 1-2 minutes until the solvent volatilized and then apply glue; if used by machine, it is recommended to set a reasonable spraying amount according to the amount of adhesive.
- Sizing: it is recommended to use the machine to glue, and the amount of glue should be tested in advance to ensure that the spread area of glue is moderate, and no glue overflow occurs after pressing;
- Assembly: after gluing, the silicon steel sheets can be stacked together in a specific mold, and certain pressure is applied to make the gap between the silicon steel sheets meet the size requirements.
- Curing: put the fixed mold at room temperature for curing. Note: in the curing process do not make the product by external force impact to avoid damage and failure.
Properties
- Typical Properties
Value Units Test Method / Conditions Operating Temperature Range -60 to 180 °C - - Cured Mechanical Properties
Value Units Test Method / Conditions Lap Shear Strength (at 21 to 25°C, at 1h) min. 8 Mpa GB/T 7124（DIN EN 1465） Lap Shear Strength (at 21 to 25°C, at 24h) min. 10 Mpa GB/T 7124（DIN EN 1465） - Uncured Properties
Value Units Test Method / Conditions Rheology Viscosity 1000 - 3000 mPa·s Brookfield - RVT, 25 °C, Spindle 4, speed 20 rpm Density 1.05 g/cm³ GB/T13354 Flash Point 102 °C ASTM D7263 Fixture Curing Time (with primer) 0.5 - 3 min - Full Curing Time (at 21 to 25°C, with primer) 3 - 24 Hrs -
Safety & Health
- Caution Information
Anaerobic products should NOT be used in pure oxygen and/or oxygen rich systems and in direct contact with food and should NOT be selected as a sealant for chlorine or other strong oxidizing materials.
Packaging & Availability
- Packaging Information
Unit Size
Storage & Handling
- Shelf Life
- 360 days
- Storage Information
- The product should be stored in a cool, dry location at a temperature between 5℃ to 30℃ for a maximum shelf life of 360 days.
- Do not return unused material to container, as it would result in contamination and/or premature hardening of contents.