Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Application Instructions
- For best result, clean and dry all surface to be sealed.
- Apply a continuous and even bead of silicone to one surface.
- Assemble parts. Remove excess with knife.
- Curing Profile
Recommended cure: Curing depth is 2mm at 21 - 25°C, 45 - 55% RH for 24h
Properties
- Color (Properties)
- Physical Form
- Appearance
- White paste
- Cured Mechanical Properties
Value Units Test Method / Conditions Hardness** 48.0 - ISO7619, GB/T531, Shore A Elongation at Break** 300.0 % ISO37, GB/T528 Tensile Strength** 2.3 MPa ISO37, GB/T528 Adhesion Strength** 1.8 MPa ISO4587, GB/T7124 - Electrical Properties
Value Units Test Method / Conditions Volume Resistivity 1.0 x 10¹⁵ Ω.cm IEC60093, GB/T1692 Breakdown Tension 20.0 kV/mm IEC 60243-1, GB/T16- -95 - Technical Data
Value Units Test Method / Conditions Viscosity White paste - - Density 1.37 g/cm³ - Extrusion Rate 10 - 20 s/20g - Working Time 5 - 15 min - - Cured Properties
Value Units Test Method / Conditions Flash Point* min. 93 °C ISO3679,GB/T 5208-2008 Cure Speed (Fixture/full, Cured at 21 - 25°C, 45 - 55% RH) 6.0 min/24h - Operating Temperature Range* - 54 - 210 °C - - Damp Heat Aging Test Properties
Value Units Test Method / Conditions Elongation at Break (at 85°C, 85% RH, for 1000h) 320.0 % ISO37, GB/T528 Tensile Strength (at 85°C, 85%RH, 1000h) 1.6 MPa ISO37, GB/T528 - Note
* - Cure speed will vary with temperature, relative humidity, depth of material and presence of moisture.
** - Measured on cured sheets approx. 2mm. Cured at 21 - 25°C, 45 - 55% RH for 14 days, tested at 21 - 25°C.
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
- 310ml
- 400ml
- 600ml
- 25kg
- 270kg
Storage & Handling
- Shelf Life
- 12 Months
- Storage Condition
Product shall be ideally stored in a cool, dry area in unopened containers at room temperature.
- Disposal Advice
- Allow adequate ventilation when using.
- Avoid prolonged skin contact.
- In case of eye contact, flush with water and seek medical attention.
- This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials.