Swift®tak 2050

This product has the following benefits;

• high surface tack
• good heat and plasticizer resistance

Swift® tak 2050 is used for coating various materials.

Application method: Roll coater, coating knife or notched trowel
Rotary jet nozzle: 2.3 – 2.5 mm
Material pressure: approx. 2 bar
Atomizing pressure: approx. 4 – 5 bar
Thinner: water
Coverage: 80 – 150 g/m², depending on material
This product can be hand applied with a fine notched trowel. When coating larger areas, it should be applied with a roll coater or coating knife. After drying the coated materials should be covered with a qualified silicone foil or paper. Drying time varies depending on temperature, amount of adhesive applied, and the material used. For some materials, such as textiles and foams, the adhesive should be applied to the silicone paper, allowed to dry and transfer onto the desired material.

This product is stored in original sealed packaging protected from sun, dust, moisture and high temperatures. Clean and dry conditions above +5°C and below +25°C.