Swift®col 9573 is a solvent-based acrylic pressure-sensitive adhesive. It features high cohesion, good green tack, and excellent aging UV resistance. The cured product forms a transparent and clear film.

Product Type: 2K (2 component) Adhesive, Pressure Sensitive Adhesive, Solventborne Adhesive

Application Area: Indoor Areas, Outdoor Areas

Compatible Substrates & Surfaces: Cardboards, Elastomers & Rubbers, Paper, Plastic Film, Polyester Films, Polyethylene (PE), Polyethylene (PE) Film, Polypropylene (PP), Polyurethane, Textiles

Chemical Family: Acrylics & Acrylates, Natural Rubbers, Polyisoprenes

Features: Good Green Tack, High Cohesion, Improved Ageing Resistance, Optically Clear, Solvent-Based, UV Resistant

Technical Data Sheet

Ask H.B. Fuller Questions

Luke Brown avatar
  • TypeDocument Name
View All Documents

Enhanced TDS

Identification & Functionality

Features & Benefits

Ready-to-Use Product Features
Product Characteristics

Main performances of cured product:

  • high cohesion
  • good green tack
  • good ageing UV resistance
  • transparent and clear film

Applications & Uses

Markets
Applications
Application Area
Compatible Substrates & Surfaces
Product Application

It is used in 2-components system for production of peelable labels and protective films for outdoor and indoor applications.

Application Instructions: This product must be cross-linked using a liquid Isocyanate. Mixed product should be coated with proper coating equipment, such as transfer and roller coater, to release paper or release film. After being dried it should be coupled with substrate. It could also be applied directly on substrate if required. It is very important that the adhesive is perfectly dry before lamination. Traces of residual solvent could inhibit cross-linking process, which leads to a reduction of final technical characteristics. This product can be diluted with different solvents such as ketones, aromatic hydrocarbons, and esters. A mix of aliphatic hydrocarbons can also be used for dilution. Solvents must be anhydrous.

Properties

Appearance
From colorless to light opaque
Typical Properties
ValueUnitsTest Method / Conditions
Solids Contentapprox. 42%-
Viscosity (at 25°C)approx. 4000mPa.s-
Note

Typical values may slight variations may occur but will not affect product’s meeting the standard technical parameters as stated;

Storage & Handling

Shelf Life
12 months
Storage Information

The product in original sealed packaging protected from sun, dust, moisture and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Lower than suggested storage temperatures (particularly during winter) leads to a strong thickening of the solution and consequently to a bad adhesive application. This product is not sensitive to cold and it’s useable again after rewarming. Do not expose to heat.