Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Characteristics
- medium-low peel adhesion
- high coating weight delivered through high solids content
- soft and transparent dry film with high cohesion
- good resistance against UV and humidity
- toluene and/or other aromatic hydrocarbons free
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Application
2-components system used for production of protective films and other removable, medium-low Peel, for indoor and outdoor applications.
Application Instructions: Before use the product must be mixed with Swift®hardener 9610 or other recommended isocyanic crosslinkers to achieve right cohesion and adhesion levels on the coated material. The mixture must be fully consumed within 1 hour from its preparation. Please contact Technical service team for more information about right mixing ratio. The product is then applied directly on the substrates to be bonded with systems such as Mayer bar or rotogravure. If necessary, the product can be applied by transfer from siliconized or polythene paper after evaporation of the solvent. It is very important that the substrate is perfectly dry before being rewound or coupled; in fact, traces of residual solvent can give rise to self-adhesives with technical characteristics different from the expected standard. We recommend washing the equipment used for the application of this self-adhesive with acetone, to facilitate coagulation and easy removal of the dried polymer.
Properties
- Physical Form
- Appearance
- Pale yellowish / low viscosity fluid
- Typical Properties
Value Units Test Method / Conditions Solids Content approx. 30 % - Density (at 20°C) approx. 0.78 g/cm³ - Viscosity (at 25°C) approx. 2 000 mPa.s -
Storage & Handling
- Shelf Life
- 12 months
- Storage Information
The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Remaining below recommended temperature the product is again useable after rewarming.
- Storage Information
Swift®col 9325, stored at temperature between 10°C and 30°C on its sealed original containers, is stable for 12 months.