Swift®col 9130
1 of 11 products in this brandSwift®col 9130 is a solvent-based pressure sensitive adhesive formulated with natural rubber and synthetic resins. It features high peel adhesion, a high coating weight due to its high solids content, and a soft, transparent dry film with high cohesion after curing. It also offers good resistance to UV and humidity, and is free from toluene and other aromatic hydrocarbons.
RTU Product Type: 2K (2 component) Adhesive, Pressure Sensitive Adhesive, Solventborne Adhesive
Application Area: Indoor Areas, Outdoor Areas
Compatible Substrates & Surfaces: Fabrics, Plastic Film, Polyester Films, Polyethylene (PE) Film, Polypropylene (PP)
Chemical Family: Natural Rubbers, Polyisoprenes
Features: Excellent Dry Film Stability, Excellent Humidity Resistance, High Cohesion, High Peel Adhesion, High Solids Content, Medium-Low Peel Adhesion, Solvent-Based, UV Resistant
-
Type Document Name
-
Technical Data SheetSwift®col 9130 Technical Data Sheet
Enhanced TDS
Identification
- Carrier
- Chemical Family
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Compatible Substrates & Surfaces
- Segment
Applications & Uses
- Product Application
-
2-components system used for production of protective films and other removable, medium-low Peel, for indoor and outdoor applications.
Application Instructions: Before use, this product must be mixed with Swift®hardener 9610 or other recommended isocyanic crosslinkers to achieve right cohesion and adhesion levels on the coated material. The mixture must be fully consumed within 1 hour from its preparation. Please contact Technical service team for more information about right mixing ratio. The product is then applied directly on the substrates to be bonded with systems such as Mayer bar or rotogravure. If necessary, it can be applied by transfer from siliconized or polythene paper after evaporation of the solvent. It is very important that the substrate is perfectly dry before being rewound or coupled; in fact, traces of residual solvent can give rise to self-adhesives with technical characteristics different from the expected standard. We recommend washing the equipment used for the application of this self-adhesive with acetone, to facilitate coagulation and easy removal of the dried polymer.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Characteristics
-
- high peel adhesion
- high coating weight delivered through high solids content
- soft and transparent dry film with high cohesion after curing
- good resistance against UV and humidity
- Toluene and/or other Aromatic hydrocarbons free
Packaging & Availability
- Regional Availability
Physical Properties
- Physical Form
- Appearance
-
Pale yellowish low viscosity fluid
Properties
- Density:
-
780.0 kg/m³
- Shelf Life:
-
12.0 months
- Solid Content:
-
30.0 %
- Specific Gravity:
-
0.78
- Viscosity:
-
2000.0 cps
- Note
-
Typical values may slight variations may occur but will not affect product’s meeting the standard technical parameters as stated;
- Typical Properties
-
Value Units Test Method / Conditions Density (at 20°C) approx. 0.78 g/cm³ - Solids Content approx. 30 % - Storage Temperature 5 - 35 °C - Viscosity (at 25°C) approx. 2000 mPa.s - - Appearance
-
Pale yellowish low viscosity fluid
Storage & Handling
- Storage Information
-
The product in original sealed packaging protected from sun, dust, moisture, and high temperatures. The product to be stored in Clean and dry conditions above +5°C and below +35°C. Remaining below recommended temperature the product is again useable after rewarming.
- Shelf Life
-
12 months