SILAPRENE® DC13180

Surface preparation:

• Clean, dry, dust-free surfaces are required for optimum bond strength. A solvent wipe is recommended for maximum adhesion. Surface temperatures should be maintained at temperatures above 40°F.
• Bonds to rigid surfaces are usually improved by a solvent wipe followed with light abrasion (180 grit), and another solvent wiping to remove abrasive residue. Dry surfaces thoroughly before applying adhesive.

Application methods:

• Suitable spray equipment is listed below. Others are available as well. The adhesive should be applied in smooth even coats to both surfaces at a rate of at least 2 dry grams per square foot of bonding area.
• Porous materials, such as fabric, foam or wood may require two coats of adhesive. Join the surfaces when the adhesive is tacky to the touch but does not transfer to the finger. Adequate pressure must be applied to assure complete contact.
• Binks HVLP BBR Mach I with 0.055  - 0.070 fluid tip Graco Delta with 0.055 - 0.070 fluid tip Devilbiss JGMV530 with 0.055 - 0.070 fluid tip.

Clean-up:

• Acetone is recommended for cleaning equipment and over spray. Other solvents will provide varying degrees of cleaning

This product is extremely flammable. Vapors may form an explosive mixture with air. Precautions should be taken to keep product away from fire, sparks, motors and other sources of heat or flame. Turn off or deactivate any electrical equipment or sources of ignition. Adequate ventilation is required to keep vapor concentration below the Threshold Limit Value.

• For professional or industrial use only
• Keep away from children
• Keep container closed when not in use

Store in closed container under 80ºF.