Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Product Information
Technology / Base One-component sealant Type of Product Silane sealant Curing Mechanism Moisture-curing Appearance / Color Bright white Consistency Paste
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Typical Applications
- PVC TrimWelder™ Fill & Flex™ was specifically formulated to be used for expansion and contraction joints on PVC lumber and trim board.
- For use as a filler only. For structural and permanent applications, use either PVC TrimWelder™ Fast Cure or Slow Cure.
- Contact an H.B. Fuller PVC TrimWelder™ adhesives Applications Specialist for further recommendations on adhesive selection.
- Application Instructions
PVC TrimWelder™ Fill & Flex™ comes ready-to-use. Cut the tip to the desired bead size. Break the seal inside the nozzle and use a standard caulking gun to dispense. PVC TrimWelder™ Fill & Flex™ may take several days to cure depending on temperature and humidity.
Properties
- Color (Properties)
- Physical Form
- Cured Properties
Value Units Test Method / Conditions Hardness 40.0 - Shore A Elongation 700.0 % - Coverage 32' x 1/4" (120' x 1/8") inches - - Uncured Properties
Value Units Test Method / Conditions Viscosity Paste - - Specific Gravity (at 20/20°C) 1.06 - - Flash Point 170.0 °F Pensky-Martens CC Solvents None - - Clean Up Solvents MEK, Acetone - -
Packaging & Availability
- Country Availability
- Packaging Type
- Regional Availability
- Packaging Information
Typically sold in 300 mL cartridges.
Storage & Handling
- Shelf Life
- 12 Months
- Storage & Shelf Life
Store in an unopened original container in a cool, dark area between 55°F to 75°F. Avoid moisture and water since this product is a moisture-curing material.