Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
Apply when air or substrate temperature is between 40°F (4°C) and 90°F (32°C). For applications outside this range of temperatures, contact ProSpec® Technical Services.
- Hold Instant Hydraulic Cement in gloved hand or trowel until itbecomes slightly warm and then apply directly into opening and maintain constant pressure until final set (3 - 4 minutes).
- Smooth or mold material immediately after final set.
- A plastic bag can be used to carry material for underwater repairs.
Properties
- Physical Form
- Technical Data
Value Units Test Method / Conditions Set Time (Initial) 1 - 3 minutes ASTM C 191 Set Time (Final) 3 - 4 minutes ASTM C 191 Compressive Strength (1 hour) min. 1,600 psi ASTM C 109 Compressive Strength (1 day) min. 2,800 psi ASTM C 109 Compressive Strength (7 days) min. 6,650 psi ASTM C 109 Tensile Strength min. 350 psi ASTM C 307 Flexural Strength (7 days) min. 1,000 psi ASTM C 78 Linear Shrinkage (1 day) 0.01 % ASTM C 157 Density-Wet 124 lb/ft³ - Coefficient Thermal Expansion 1.13 x 10⁻⁵ Inches/°F ASTM C 531 - Note
Test results obtained under controlled laboratory conditions at 73°F (22.7°C) and 50% relative humidity unless otherwise specified. Tested using 3.5 oz (0.1 L) water per 1 lb (.45 kg) powder. Reasonable variations can be expected due to atmospheric and job site conditions.
Packaging & Availability
- Regional Availability
- Packaging Information
This product is available in Gray: 50 lb (22.7 kg) pail - Product #65300650
Storage & Handling
- Shelf Life
- 12 months
- Shelf Life
Shelf life of this product is 12 months from the date of manufacture when stored in the original, unopened container, away from moisture, under cool, dry conditions and out of direct sunlight.