Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Characteristics
- general purpose PSA
- good heat resistance
- high tack and non-staining
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Product Application
Label stock in particular paper and thermal imaging labels..
Application Instructions: Suggested application temperature: 350°F
Cleaning Instructions: Consult the equipment manufacturer for cleanup procedures. After clean-up, flush the applicator thoroughly with hot melt to purge the system.
Properties
- Color (Properties)
- Typical Properties
Value Units Test Method / Conditions Softening Point 175 - 193 °F Mettler Static Adhesion Failure Test Temperature 165.0 °F - Peel 4.75 lb/inch - Tack Loop 4.18 lb/inch - Viscosity (at 350°F) 5800 - 7800 cPs -
Safety & Health
- Safety Advice
To minimize the risk of burns, we recommend the use of eye protection and protective clothing when working near a hot melt applicator. To minimize the risk of flammable vapors, do not exceed a melt temperature above 400°F. Prevent the build-up of vapors. Extinguish all sources of ignition during hot melt use.
Storage & Handling
- Shelf Life
- 730 days
- Storage Information
The product to be stored in Clean and dry conditions above 20°F and below 100°F.