Millennium Hurricane Force® Membrane Adhesive HS

Our contractor preferred One Step™ patented application process* is efficient and always dependable. Application is quick and easy, resulting in significant labor savings for the contractor; 100 square feet of roof membrane can be installlled in less than 2 minutes. The VOC content of this adhesive is less than 20 g/L. Millennium Hurricane Force® Membrane Adhesive HS is approved for use in VOC regulated markets such as California and the OTC States. This product is ideal for use on projects sensitive to building disruption concerns such as re-roofing schools and hospitals.

Millennium Hurricane Force® Membrane Adhesive HS is designed for use as an adhesive for bonding approved base sheets, vapor retarders and roof membranes to approved substrates. Millennium Hurricane Force® Membrane Adhesive HS is ideal for applications where hot asphalt or solvent based cold process adhesives cannot be used. Millennium Hurricane Force® Membrane Adhesive HS can also be used to adhere roof pedestals to SBS roof membrane.

• Structural Concrete
• Base sheets ( sanded or smooth surfaced)
• Smooth built-up roof surfaces re-roof applications)
• Modified Bitumen (sanded granule surfaced only)
• Metal panels
• Lightweight insulating concrete (LWIC)
• Wood
• Fiber Glass
• Polyisocyanurate insulation
• Polystirene (XPS, EPS)
• Perlite insulation
• Wood fiber insulation
• Gypsum cover board
• High density ISO cover board

Application Membranes

• SBS modified bitumen base sheets
• SBS modified bitumen mineral surfaced cap sheets

• Do not apply to wet or damp surfaces.
• Not intended for insulation attachment.
• Not to be used with torch down membranes or membranes withplastic films.

The fast and dependable One Step™ applicators make applying Millennium Hurricane Force® Membrane Adhesive HS simple:

• Patented Multi-Bead and Multi-Bead Plus*
• Millennium One Step™ Battery Powered Applicator
• Millennium One Step™ Pneumatic Single Bead Applicator

All work surfaces should be clean, dry, and free of dirt, dust, debris, oils, unadhered coatings, deteriorated membrane or other contaminants that may result in a surface that is not sound or is uneven.
For re-cover applications over weathered asphalt BUR or smooth surfaced SBS modified bitumen, apply Millennium Universal Primer prior to the application of Millennium Hurricane Force® Membrane Adhesive HS. For applications over fresh and/or non-oxidized asphalt, apply Millennium Surface Treatment prior to the application of Millennium Hurricane Force® Membrane Adhesive HS.

1. With a utility knife, remove the molded tips at the groove from the One Step™ mixing head.

2. Attach a One Step™ mixing nozzle to the threaded mixing head.

3. Place the cartridge into the appropriate One Step™ applicator.

4. Dispense an initial amount of Millennium Hurricane Force® Membrane Adhesive HS into a waste container to ensure a proper mix, then diskard.

5. Apply Millennium Hurricane Force® Membrane Adhesive HS directly to the substrate using a ribbon pattern. Space 1/2” - 3/4” (1.3 cm - 1.9 cm) wide beads either 12” (30cm), 9” (23 cm), 6” (15 cm), or 3” o.c. (7 cm) depending on project specifications and wind uplift requirements.

6. Immediately set membrane into wet adhesive. Do not allow the adhesive to skin over. Eliminate uneven surfaces to ensure positive contact between the membrane and substrate.

7. Roll membrane with a weighted roller to ensure positive contact between adhesive, membrane, and substrate.

8. Complete side laps and head laps with Millennium Hurricane Force® Lap and Flashing Adhesive.

9. Unused adhesive can be applied at a later date by simply plugging the cartridges (with provided half moon plugs) and using a new One Step™ mixing nozzle. Company n 888.564.9733 n wttus.comOSMASD0908-A09/08SAFETYPrior date of manufacture. All claims must be writing within 12 months of the original purchase. information regarding 10 year, 15 year or extended term system warranties, contact our Department.

Millennium Hurricane Force® Membrane Adhesive HS is available in the following package:

Each cartridge will produce approximately 100 - 125 lineal feet (30m - 38m) of 1/2” - 3/4” (1.3cm - 1.9cm) wide adhesive beads. A four cartridge case will produce approximately 400 - 500 lineal feet (122m - 152m) of 1/2” - 3/4” (1.3cm - 1.9cm) wide adhesive beads.
Coverage rates may vary when used over irregular surfaces.