Magik VB 95
1 of 21 products in this brandRTU Product Type: Moisture Vapor Barrier, Waterborne Coating
Features: Anti-Fungal, Durable, Excellent Toughness, Flame Resistant, Fungus Resistant, Good Adhesion, Good Washability, Good Weather Stability, Highly Flexible, High Strength, Low Emissions, Low VOC, Mold Resistance, UL Flame Rated, Water-based, Water Resistant
Application Area: HVAC Ducts, Joints
Compatible Substrates & Surfaces: Aluminum, Fiberglass, Foam, Metal, Polystyrene (PS), Polyurethane
Application Method: Brush, Spray
-
Type Document Name
-
Technical Data SheetMagik VB 95 Technical Data Sheet
Enhanced TDS
Identification
- GBU
- RTU Product Type
- Categories
Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
Applications & Uses
- Application Procedure
-
The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
Apply MAGIK VB 95 at 1 - 1.6 m2 / liter (subject to surface condition). It is very important to ensure that each coat of MAGIK VB 95 is totally cured before the next coat is applied. The dry film thickness will vary with fabric selected. Use clean paint brushes which are suitable for water based paints. Apply with full brush and spread out evenly.
- Product Applications
-
MAGIK VB 95 is used for outdoors as well as indoors-thermal insulation material on metal duct, in areas where high humidity and elevated temperature are major problems. MAGIK VB 95 is ideal for sealing ASJ, FRK and FSK jackets and board facings at joints, laps over staple and weld pin puncture. MAGIK VB 95 acts as an excellent duct closure sealant. MAGIK VB 95 may also be used over finishing cement or dry concrete.
Features
- Ready-to-Use Product Features
Features & Benefits
- Labeling Claims
- Product Features
-
- Zero Flame spread and Smoke developed
- Excellent Adhesion and High Strength
- Mold and Fungus resistant
- Washable and Water Resistant
- Compatible with Polystyrene Foam Insulation
- Compatible with Polyurethane Foam Insulation
- Non Toxic and Non Flammable
- Highly Solid and Weather-Proof
- UV Resistant
- Antibacterial
- Doesn't get discolored with age.
Packaging & Availability
- Regional Availability
- Packaging Information
-
5 USG Plastic Pail
Physical Properties
- Physical Form
- Appearance
-
White Thixotropic Paste
Properties
- Product Properties
-
- VOC Content: Meets requirements for LEED IEQ 4.2, Low Emitting Materials, Paints & Coatings.
- Coverage Range (subject to surface condition): Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces may require more litres to obtain required dry thickness. 1 - 1.6 m2 /ltr per coat to obtain wet film thickness of 1 - 0.5 mm per coat.
- Specifications
-
Value Units Test Method / Conditions Coverage 1 - 1.6 m²/L - Density 1.30 - 1.50 kg/L ASTM D 1475-98 Drying Time (set to touch) 2 - 3 hours ASTM D 1640 Drying Time (through dry) 15 - 17 hours ASTM D 1640 Film Thickness (wet film, per coat) 0.5 - 1 mm - Service Temperature (temperature at coated surface) - 30 - 110 °C - Solid Content 60 - 66 % ASTM D 1644 Viscosity 65000 - 75000 cPs ASTM D 2196 Volatile Organic Compound Content max. 13 g/L - Water Vapor Permeance (at 1.10 mm, dry film thickness) 0.009 perms ASTM E 96 - Typical Properties
-
Value Units Test Method / Conditions Storage Temperature 10 - 35 °C - - Appearance
-
White thixotropic paste
Regulatory & Compliance
- Quality Standards
Storage & Handling
- Storage Conditions
-
- 12 months from date of manufacturing in original unopened containers.
- Store product (10°C - 35°C) for maximum storage life.
- Higher temperatures reduce normal storage life.
- Lower temperatures may cause increased viscosity of a temporary nature.
- Rotate stock on a “first in-first out” basis.
- Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
- Shelf Life
-
12 months
Thermal Properties
- Flame Rating