Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Features
- Zero Flame spread and Smoke developed
- Excellent Adhesion and High Strength
- Mold and Fungus resistant
- Washable and Water Resistant
- Non-Toxic and Non Flammable
- UV Resistant
- Antibacterial
- Doesn't get discolored with age
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Product Applications
MAGIK 30-36 AF is used for outdoors as well as indoors-thermal insulation material on metal duct, in areas where high humidity and elevated temperature are major problems. MAGIK 30-36 AF is an ideal product to prevent mold and fungus growth. MAGIK 30-36 AF may be applied to the joints or edges of fibrous duct liner insulation to seal and prevent air erosion.
- Application Procedure
The surface should be structurally sound, clean, dry, leveled and free from dust, curing compounds, grease and other loose debris. Keep container closed when not in use.
Apply MAGIK 30-36 AF at 1 - 1.7 m2 / liter (subject to surface condition). It is very important to ensure that each coat of MAGIK 30-36 AF is totally cured before the next coat is applied. The dry film thickness will vary with fabric selected. Use clean paint brushes which are suitable for water based paints. Apply with full brush and spread out evenly.
Properties
- Flame Rating
- Physical Form
- Appearance
- White Thixotropic Paste
- Specifications
Value Units Test Method / Conditions Specific Gravity 1.20 - 1.50 kg/ltr ASTM D 1475-98 Solid Content 61 - 65 % ASTM D 1644 Viscosity 35000 - 60000 cPs ASTM D 2196 Water Vapor Permeance (at .030 inch dry film thickness) 0.4 – 1.3 perms ASTM F 1249 VOC max. 12 g/ltr ASTM D 2369-98 Drying Time (Set to Touch) 2 - 3 hrs ASTM D 1640 Drying Time (Dry Through) 15 - 17 hrs ASTM D 1640 Service Temperature (Temperature at coated surface) - 20 - 100 °C - - Product Properties
- VOC Content - Meets requirements for LEED IEQ 4.2, Low Emitting Materials, Paints & Coatings.
- Coverage Range (subject to surface condition): Wet coverages shown below are for smooth non-porous surfaces. Porous or rough surfaces may require more litres to obtain required dry thickness. 1 - 1.7 m2 /ltr per coat to obtain wet film thickness of 1 - 0.5 mm per coat.
Regulatory & Compliance
- Quality Standards
Packaging & Availability
- Regional Availability
- Packaging Information
5 USG Plastic Pail
Storage & Handling
- Shelf Life
- 12 months
- Storage Conditions
- 12 months from date of manufacturing in original unopened containers.
- Store product (10°C - 40°C) for maximum storage life.
- Higher temperatures reduce normal storage life.
- Lower temperatures may cause increased viscosity of a temporary nature.
- Rotate stock on a “first in-first out” basis.
- Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.