Enhanced TDS
Identification & Functionality
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Application Information
Applications Fields of Application Construction industrial assembly
Special Applications Especially suitable for RV (recreational vehicle) assembly
Processing Suitable Substrates Various aluminum alloys
Various steel alloys
Many thermoplastics (except PMMA)
Thermosetting plastics
Glass Concrete Stone Various ceramics
Wood Various other substrates
Consistency Pasty Surface Requirements Dry Clean Free of grease Free of dust Adhesion Promoter (absorbing surface) Körabond HG 92
Adhesion Promoter (non absorbing surface) Körabond HG 78
Cleaning Cleaner for Tools Körasolv Silicone
- Preparation
For some substrates the use of mechanical pretreatment and/or cleaner or primer is necessary to achieve good adhesion. Refer to the product properties section of this data sheet for special surface requirements and suitable adhesion promoters. Due to the huge variety of available substrates preliminary testing regarding adhesion and compatibility is strongly recommended.
- Processing
Low temperatures can cause a temporary increase in viscosity resulting in reduced extrusion and slower curing rates.
- Cleaning Instructions
Clean tools immediately after use. Once cured, the material can only be removed mechanically. Appropriate cleaners are listed in the product properties.
Properties
- Color (Properties)
- Physical Form
- Physical Properties
Value Units Test Method / Conditions Density 1.01 g/cm³ DIN EN 542 - Cured Properties
Value Units Test Method / Conditions Skin Formation Time 8.0 min Kö-test method 100109 Hardness (after 28d, thickness of specimen = 6 mm) 20.0 - DIN ISO 7619-1, Shore A Tensile Strength 1.1 MPa DIN EN ISO 527 Maximum Movement Capability 25.0 % - - Processing Parameters
Value Units Test Method / Conditions Processing Temperature 10 - 30 °C - Required Squeezing Pressure 2.0 bar - - Recommended Operating Conditions
Value Units Test Method / Conditions Service Temperature - 40 - 180 °C -
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
Ködisil 110T should be used within the shelf life specified on the packaging. The storage stability only applies to material stored in original unopened containers, at storage temperature -15°C to 25°C.