Intrafol™ 1383

Identification

Chemical Family

Polyurethanes (PU)

GBU

BAS

RTU Product Type

2K (2 component) Coating,

Primer,

Solventborne Coating

Categories

Markets → Building & Construction → Applications → Building Materials → Wood

Markets → Consumer Goods → Applications → Furniture

Technologies → Ready-to-Use Products → Product Families → Paints & Coatings → Primers & Sealers

Application Information

Cure Method

Chemical Cure

Applications

Application Area

Furniture,

Woodwork,

Panels,

Decorative Edges

Compatible Polymers & Resins

Thermoplastic Polyolefins (TPO)

Compatible Substrates & Surfaces

Wood,

Composites,

Acrylonitrile Butadiene Styrene (ABS),

Polypropylene (PP)

Applications & Uses

Preperation and Processing

Preparation

The surfaces to be bonded must be dry, free of grease, free of dust and free of oil.
 

Processing

Apply a thin and homogenous coat of Intrafol™ 1383 on the plastic surface and dry the applied film. Refer to the technical data table regarding the Drying time. For new materials or applications, the suitability must be confirmed by preliminary tests.

Features

Ready-to-Use Product Features

Good Adhesion,

Medium Viscosity

Features & Benefits

Labeling Claims

Chlorine-free,

Polyvinyl Chloride (PVC)-free,

Sustainable

Product Benefits

• Good adhesion to ABS
• Solvent composition appropriate for ABS
• Free of PVC
• With hardener suitable for oxidatively pretreated thermoplastic
• polyolefin (TPO)

Packaging & Availability

Regional Availability

• Europe
• India/MiddleEast/Africa (IMEA)

Properties

Typical Properties

	Value	Units	Test Method / Conditions
Density	0.81	g/cm³	DIN EN ISO 2811-1
Solid Content	12.5	%	Internal HBF Standard

Processing Properties

	Value	Units	Test Method / Conditions
Drying Time (at 70°C, When applied to warm edge band, drying at room temperature may be sufficient.)	15 - 30	s	-
Processing Temperature	15 - 25	°C	-
Storage Temperature	5 - 35	°C	-
Viscosity (at 20°C)	35	s	Cup 4, DIN EN ISO 2431
Weight Per Unit Area (Wet)	30 - 60	g/m²	-

Storage & Handling

Storage Information

Intrafol™ 1383 should be used within the shelf life specified on the packaging. The storage stability applies to material stored under appropriate conditions only (original unopened containers, recommended storage temperature).

Technical Details & Test Data

Mix Ratio With Optional Cross-linking Agent

Processing Guidelines and Parameters
Mixing Ratio (Part A : Part B) by weight	100 : 5	Swift®hardener 9585 Yellow, H.B. Fuller® Hardener 9515
Curing Potlife	6 h	Swift®hardener 9585 Yellow, H.B. Fuller® Hardener 9515

Processing Information

Suitable Substrates	Thermoplastic polyolefin (TPO)
Suitable Substrates	Acrylonitrile butadiene styrene (ABS)
Suitable Adhesives	Edge banding hot melts (e.g. EVA, APAO, reactive PUR)
Consistency	Liquid
Surface Requirements	Dry
Surface Requirements	Free of grease
Surface Requirements	Free of dust
Surface Requirements	Free of oil
Application Method	Roller coating
Product is free of	Polyvinyl chloride (PVC)
Hints	Allow the coated substrate to cool to room temperature before winding it up.

 

Preparation	Intrafol"1383 must be stirred well before use
Frost protection	Protect Intrafol 1383 strictly from frost, product will be damaged.
Undercooled adhesive	Please contact the Application Enginnering.
Pretreatment of TPO	Thermoplastic polyolefin (TPO) must be oxidatively pretreated Minimum surface tension 50 mN/m