Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Equipment Features
- Ready-to-Use Product Features
Applications & Uses
- Application Area
- Cure Method
- General Instructions
Application Guidelines
- For optimum results, parts should be clean and free from any contamination on the bonding surface.
- If parts do not mate flush together, use a higher viscosity product to compensate for the gap.
- Factors Affecting Cure Speed
- Gap: Thin bond lines result in faster cure speed. Larger gaps will lengthen cure speed.
- Humidity: Cure and fixture times can be influenced by the humidity conditions at the time of assembly. The higher the relative humidity (RH), the faster cure and fixture times will be.
- Fixture time data based on our testing is conducted at 50% relative humidity.
Properties
- Color (Properties)
- Physical Form
- Appearance
- Clear liquid
- Cured Properties
Value Units Test Method / Conditions Shear Strength (Steel) min. 2100 psi ISO 4587 Shear Strength (Aluminum) min. 1750 psi ISO 4587 Shear Strength (Neoprene) min. 750 psi ISO 4587 Shear Strength (ABS) min. 900 psi ISO 4587 Shear Strength (PVC) min. 900 psi ISO 4587 Shear Strength (Polycarbonate) min. 900 psi ISO 4587 Shear Strength (Phenolic) min. 850 psi ISO 4587 Tensile Strength (at 40°C, 95% R.H, Strength on Polycarbonate after 500 hrs) min. 1800 psi ISO 6922 Damp Heat Aging 1 - - Volume Resistivity 2 to 10 × 10¹⁵ ohm·cm ASTM D257 Dielectric Constant 2 to 3.5 at 1kHz ASTM D150 Dissipation Factor max. 0.02 at 1kHz ASTM D150 - Uncured Properties
Value Units Test Method / Conditions Viscosity 500 cPs - Specific Gravity 1.05 - - Storage Condition max. 22 °C - Set Time (Steel) max. 10 sec - Set Time (Aluminum) max. 10 sec - Set Time (Neoprene) max. 5 sec - Set Time (ABS) max. 10 sec - Set Time (PVC) max. 10 sec - Set Time (Polycarbonate) max. 10 sec - Set Time (Phenolic) max. 10 sec -
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
Store product in unopened containers, out of direct sunlight, in a dry location. Material should be stored at or below 22°C. For extended shelf life unopened containers of the product may be refrigerated.