Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
- No Surface Preparation Required
- Non-Flammable & Low Odor engineered formulation
- Excellent Adhesion Properties
- Excellent Strength to Metals, E-Coat, Thermoplastics, Thermosets, and Engineering Plastics
- Excellent Impact Resistance
- Suitable for Easy Manual and Pneumatic Dispensing
- Excellent Thermal Performance
- 100% Reactive
- Room Temperature Cure
- 10:1 meter-mix product for ease of application
- Use on as received metal surfaces including aluminum, stainless and plated steels and forms tough, high strength bonds without surface preparation
Applications & Uses
- Application Method
- Compatible Substrates & Surfaces
- Recommended Uses
Recommended For
METALS
- Aluminum
- Steel
- Stainless
- E-Coated Metal
THERMOSETS
- Fiberglass
- Phenolic
- Gel Coat
- Epoxy
- RIM Urethane
- Polyurethane
- Liquid Molding Resin
THERMOPLASTICS
- Acrylic
- ABS
- Polycarbonate
- Nylon/PA
- PPO
- Vinyl
- PVC
- Styrene
- Peek
- PBT Blends
- PET Blends
- Application Instructions
General Instructions
- The product is best used at temperatures between 65°F and 80°F.
- Temperatures below 65°F will slow the cure speed of the material and viscosities will be higher.
- Temperatures above 80°F will cause the material to cure faster and viscosities will be lower.
- For consistent dispensing maintain temperature in the above mentioned range.
- For optimum bond strength and to insure maximum performance in the finished assembly mate parts together within the specified work time of the adhesive.
- Make sure the bond joint has uniform coverage and that a sufficient amount of adhesive is in the bond area.
- It is important to have the adhesive applied, parts aligned and positioned, within the established work times for the product.
- To ensure maximum performance in the finished assembly parts should remain undisturbed until the fixture time is reached.
Properties
- Physical Form
- Appearance
- Off White or Amber Viscous Liquid
- Typical Properties
Value Units Test Method / Conditions Mixed Density 1.05 g/cc - - Cured Mechanical Properties
Value Units Test Method / Conditions Gap Fill Dimension 0.25 inch - Hardness 75.0 Shore D - Tensile Strength 2800 - 3200 psi - Over Lap Shear Strength 2800 - 3200 psi Carbon Steel Over Lap Shear Strength 2800 - 3200 psi Aluminum - Cured Thermal Properties
Value Units Test Method / Conditions Thermal Service Range -67 to 225 °F - - Uncured Properties
Value Units Test Method / Conditions Flash Point min. 200 °F - Cure Temperature Room Temperature - - Open Time 4 - 6 minutes - Fixture Time 7 - 10 minutes - Cure Time 24.0 hrs - - Mixed Material Properties
Value Units Test Method / Conditions Volume Mix Ratio 10:1 - - Weight Mix Ratio 10:1 - - - Rheological Properties
Value Units Test Method / Conditions Viscosity (Resin) 30000.0 cPs at 25°C Viscosity (Activator) 50000.0 cPs at 25°C Thixotropic Index 5.0 - -
Packaging & Availability
- Packaging Information
- The MP58420 is conveniently packaged in 50 ml, 380 ml, 490 ml, pail, and drum kits.
- Special packaging is available upon request.
Storage & Handling
- Shelf Life
- 1 Year
- Handling and Clean-Up
- Clean up is best before the adhesive has cured.
- Cleaners containing NMP (N-methyl pyrolidone) or Citrus terpene provide the best results.
- On cured adhesive repeat use may be required.
- Storage and Shelf Life Information
- Product should be stored in a cool dry place out of direct sunlight.
- The shelf life of MP58420 is one year from date of manufacture.
- Shelf life is based on the products being stored properly at temperatures between 55°F and 75°F.
- Exposure to temperatures above 75°F will reduce the shelf life.
- This product should NEVER BE FROZEN